[sysctl] set fs.may_detach_mounts=1 even when CRIs don't set it themselves (#8635) (#8642)

* Update config.toml.j2

i think this commit code is not completed works

exam registry address : a.com:5000

insecure registry must be http://a.com:5000

but this code add insecure a.com:5000 (without http://)

If there is no http, containerd accesses with https even if insecure_skip_verify = true

solution is code edit

* Update config.toml.j2

* Update containerd.yml

* Update containerd.yml

* Update containerd.yml

* Update config.toml.j2

(cherry picked from commit dda557ed23)

Co-authored-by: Choi Yongbeom <59861163+mircyb@users.noreply.github.com>

.ansible-lint

@@ -7,6 +7,18 @@ skip_list:
 
   # These rules are intentionally skipped:
   #
+  # [E204]: "Lines should be no longer than 160 chars"
+  # This could be re-enabled with a major rewrite in the future.
+  # For now, there's not enough value gain from strictly limiting line length.
+  # (Disabled in May 2019)
+  - '204'
+
+  # [E701]: "meta/main.yml should contain relevant info"
+  # Roles in Kubespray are not intended to be used/imported by Ansible Galaxy.
+  # While it can be useful to have these metadata available, they are also available in the existing documentation.
+  # (Disabled in May 2019)
+  - '701'
+
   # [role-name] "meta/main.yml" Role name role-name does not match ``^+$`` pattern
   # Meta roles in Kubespray don't need proper names
   # (Disabled in June 2021)
@@ -16,23 +28,3 @@ skip_list:
   # In Kubespray we use variables that use camelCase to match their k8s counterparts
   # (Disabled in June 2021)
   - 'var-naming'
-
-  # [fqcn-builtins]
-  # Roles in kubespray don't need fully qualified collection names
-  # (Disabled in Feb 2023)
-  - 'fqcn-builtins'
-
-  # We use template in names
-  - 'name[template]'
-
-  # No changed-when on commands
-  # (Disabled in June 2023 after ansible upgrade; FIXME)
-  - 'no-changed-when'
-
-  # Disable run-once check with free strategy
-  # (Disabled in June 2023 after ansible upgrade; FIXME)
-  - 'run-once[task]'
-exclude_paths:
-  # Generated files
-  - tests/files/custom_cni/cilium.yaml
-  - venv

.ansible-lint-ignore

@@ -1,8 +0,0 @@
-# This file contains ignores rule violations for ansible-lint
-inventory/sample/group_vars/k8s_cluster/k8s-cluster.yml jinja[spacing]
-roles/kubernetes/control-plane/defaults/main/kube-proxy.yml jinja[spacing]
-roles/kubernetes/control-plane/defaults/main/main.yml jinja[spacing]
-roles/kubernetes/kubeadm/defaults/main.yml jinja[spacing]
-roles/kubernetes/node/defaults/main.yml jinja[spacing]
-roles/kubernetes/preinstall/defaults/main.yml jinja[spacing]
-roles/kubespray-defaults/defaults/main/main.yml jinja[spacing]

.github/ISSUE_TEMPLATE/bug-report.md

@@ -0,0 +1,44 @@
+---
+name: Bug Report
+about: Report a bug encountered while operating Kubernetes
+labels: kind/bug
+
+---
+<!--
+Please, be ready for followup questions, and please respond in a timely
+manner.  If we can't reproduce a bug or think a feature already exists, we
+might close your issue.  If we're wrong, PLEASE feel free to reopen it and
+explain why.
+-->
+
+**Environment**:
+- **Cloud provider or hardware configuration:**
+
+- **OS (`printf "$(uname -srm)\n$(cat /etc/os-release)\n"`):**
+
+- **Version of Ansible** (`ansible --version`):
+
+- **Version of Python** (`python --version`):
+
+
+**Kubespray version (commit) (`git rev-parse --short HEAD`):**
+
+
+**Network plugin used**:
+
+
+**Full inventory with variables (`ansible -i inventory/sample/inventory.ini all -m debug -a "var=hostvars[inventory_hostname]"`):**
+<!-- We recommend using snippets services like https://gist.github.com/ etc. -->
+
+**Command used to invoke ansible**:
+
+
+**Output of ansible run**:
+<!-- We recommend using snippets services like https://gist.github.com/ etc. -->
+
+**Anything else do we need to know**:
+<!-- By running scripts/collect-info.yaml you can get a lot of useful informations.
+Script can be started by:
+ansible-playbook -i <inventory_file_path> -u <ssh_user> -e ansible_ssh_user=<ssh_user> -b --become-user=root -e dir=`pwd` scripts/collect-info.yaml
+(If you using CoreOS remember to add '-e ansible_python_interpreter=/opt/bin/python').
+After running this command you can find logs in `pwd`/logs.tar.gz. You can even upload somewhere entire file and paste link here.-->

.github/ISSUE_TEMPLATE/bug-report.yaml

@@ -1,117 +0,0 @@
----
-name: Bug Report
-description: Report a bug encountered while using Kubespray
-labels: kind/bug
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Please, be ready for followup questions, and please respond in a timely
-        manner.  If we can't reproduce a bug or think a feature already exists, we
-        might close your issue.  If we're wrong, PLEASE feel free to reopen it and
-        explain why.
-  - type: textarea
-    id: problem
-    attributes:
-      label: What happened?
-      description: |
-        Please provide as much info as possible. Not doing so may result in your bug not being addressed in a timely manner.
-    validations:
-      required: true
-  - type: textarea
-    id: expected
-    attributes:
-      label: What did you expect to happen?
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro
-    attributes:
-      label: How can we reproduce it (as minimally and precisely as possible)?
-    validations:
-      required: true
-
-  - type: markdown
-    attributes:
-      value: '### Environment'
-
-  - type: textarea
-    id: os
-    attributes:
-      label: OS
-      placeholder: 'printf "$(uname -srm)\n$(cat /etc/os-release)\n"'
-    validations:
-      required: true
-
-  - type: textarea
-    id: ansible_version
-    attributes:
-      label: Version of Ansible
-      placeholder: 'ansible --version'
-    validations:
-      required: true
-
-  - type: input
-    id: python_version
-    attributes:
-      label: Version of Python
-      placeholder: 'python --version'
-    validations:
-      required: true
-
-  - type: input
-    id: kubespray_version
-    attributes:
-      label: Version of Kubespray (commit)
-      placeholder: 'git rev-parse --short HEAD'
-    validations:
-      required: true
-
-  - type: dropdown
-    id: network_plugin
-    attributes:
-      label: Network plugin used
-      options:
-        - calico
-        - cilium
-        - cni
-        - custom_cni
-        - flannel
-        - kube-ovn
-        - kube-router
-        - macvlan
-        - meta
-        - multus
-        - ovn4nfv
-        - weave
-    validations:
-      required: true
-
-  - type: textarea
-    id: inventory
-    attributes:
-      label: Full inventory with variables
-      placeholder: 'ansible -i inventory/sample/inventory.ini all -m debug -a "var=hostvars[inventory_hostname]"'
-
-  - type: input
-    id: ansible_command
-    attributes:
-      label: Command used to invoke ansible
-
-  - type: textarea
-    id: ansible_output
-    attributes:
-      label: Output of ansible run
-      description: We recommend using snippets services like https://gist.github.com/ etc.
-
-  - type: textarea
-    id: anything_else
-    attributes:
-      label: Anything else we need to know
-      description: |
-        By running scripts/collect-info.yaml you can get a lot of useful informations.
-        Script can be started by:
-        ansible-playbook -i <inventory_file_path> -u <ssh_user> -e ansible_ssh_user=<ssh_user> -b --become-user=root -e dir=`pwd` scripts/collect-info.yaml
-        (If you using CoreOS remember to add '-e ansible_python_interpreter=/opt/bin/python').
-        After running this command you can find logs in `pwd`/logs.tar.gz. You can even upload somewhere entire file and paste link here

.github/ISSUE_TEMPLATE/config.yml

@@ -1,5 +0,0 @@
----
-contact_links:
-  - name: Support Request
-    url: https://kubernetes.slack.com/channels/kubespray
-    about: Support request or question relating to Kubernetes

.github/ISSUE_TEMPLATE/enhancement.md

@@ -0,0 +1,11 @@
+---
+name: Enhancement Request
+about: Suggest an enhancement to the Kubespray project
+labels: kind/feature
+
+---
+<!-- Please only use this template for submitting enhancement requests -->
+
+**What would you like to be added**:
+
+**Why is this needed**:

.github/ISSUE_TEMPLATE/enhancement.yaml

@@ -1,20 +0,0 @@
----
-name: Enhancement Request
-description: Suggest an enhancement to the Kubespray project
-labels: kind/feature
-body:
-  - type: markdown
-    attributes:
-      value: Please only use this template for submitting enhancement requests
-  - type: textarea
-    id: what
-    attributes:
-      label: What would you like to be added
-    validations:
-      required: true
-  - type: textarea
-    id: why
-    attributes:
-      label: Why is this needed
-    validations:
-      required: true

.github/ISSUE_TEMPLATE/failing-test.md

@@ -0,0 +1,20 @@
+---
+name: Failing Test
+about: Report test failures in Kubespray CI jobs
+labels: kind/failing-test
+
+---
+
+<!-- Please only use this template for submitting reports about failing tests in Kubespray CI jobs -->
+
+**Which jobs are failing**:
+
+**Which test(s) are failing**:
+
+**Since when has it been failing**:
+
+**Testgrid link**:
+
+**Reason for failure**:
+
+**Anything else we need to know**:

.github/ISSUE_TEMPLATE/failing-test.yaml

@@ -1,41 +0,0 @@
----
-name: Failing Test
-description: Report test failures in Kubespray CI jobs
-labels: kind/failing-test
-body:
-  - type: markdown
-    attributes:
-      value: Please only use this template for submitting reports about failing tests in Kubespray CI jobs
-  - type: textarea
-    id: failing_jobs
-    attributes:
-      label: Which jobs are failing ?
-    validations:
-      required: true
-
-  - type: textarea
-    id: failing_tests
-    attributes:
-      label: Which tests are failing ?
-    validations:
-      required: true
-
-  - type: input
-    id: since_when
-    attributes:
-      label: Since when has it been failing ?
-    validations:
-      required: true
-
-  - type: textarea
-    id: failure_reason
-    attributes:
-      label: Reason for failure
-      description: If you don't know and have no guess, just put "Unknown"
-    validations:
-      required: true
-
-  - type: textarea
-    id: anything_else
-    attributes:
-      label: Anything else we need to know

.github/ISSUE_TEMPLATE/support.md

@@ -0,0 +1,18 @@
+---
+name: Support Request
+about: Support request or question relating to Kubespray
+labels: kind/support
+
+---
+
+<!--
+STOP -- PLEASE READ!
+
+GitHub is not the right place for support requests.
+
+If you're looking for help, check [Stack Overflow](https://stackoverflow.com/questions/tagged/kubespray) and the [troubleshooting guide](https://kubernetes.io/docs/tasks/debug-application-cluster/troubleshooting/).
+
+You can also post your question on the [Kubernetes Slack](http://slack.k8s.io/) or the [Discuss Kubernetes](https://discuss.kubernetes.io/) forum.
+
+If the matter is security related, please disclose it privately via https://kubernetes.io/security/.
+-->

.gitignore

@@ -3,19 +3,14 @@
 **/vagrant_ansible_inventory
 *.iml
 temp
-contrib/offline/offline-files
-contrib/offline/offline-files.tar.gz
 .idea
-.vscode
 .tox
 .cache
 *.bak
 *.tfstate
-*.tfstate*backup
-*.lock.hcl
+*.tfstate.backup
 .terraform/
 contrib/terraform/aws/credentials.tfvars
-.terraform.lock.hcl
 /ssh-bastion.conf
 **/*.sw[pon]
 *~
@@ -107,14 +102,10 @@ ENV/
 
 # molecule
 roles/**/molecule/**/__pycache__/
+roles/**/molecule/**/*.conf
 
 # macOS
 .DS_Store
 
 # Temp location used by our scripts
 scripts/tmp/
-tmp.md
-
-# Ansible collection files
-kubernetes_sigs-kubespray*tar.gz
-ansible_collections

.gitlab-ci.yml

@@ -1,6 +1,5 @@
 ---
 stages:
-  - build
   - unit-tests
   - deploy-part1
   - moderator
@@ -9,12 +8,12 @@ stages:
   - deploy-special
 
 variables:
-  KUBESPRAY_VERSION: v2.23.2
+  KUBESPRAY_VERSION: v2.17.1
   FAILFASTCI_NAMESPACE: 'kargo-ci'
   GITLAB_REPOSITORY: 'kargo-ci/kubernetes-sigs-kubespray'
   ANSIBLE_FORCE_COLOR: "true"
   MAGIC: "ci check this"
-  TEST_ID: "$CI_PIPELINE_ID-$CI_JOB_ID"
+  TEST_ID: "$CI_PIPELINE_ID-$CI_BUILD_ID"
   CI_TEST_VARS: "./tests/files/${CI_JOB_NAME}.yml"
   CI_TEST_REGISTRY_MIRROR: "./tests/common/_docker_hub_registry_mirror.yml"
   CI_TEST_SETTING: "./tests/common/_kubespray_test_settings.yml"
@@ -28,23 +27,25 @@ variables:
   ANSIBLE_INVENTORY: ./inventory/sample/${CI_JOB_NAME}-${BUILD_NUMBER}.ini
   IDEMPOT_CHECK: "false"
   RESET_CHECK: "false"
-  REMOVE_NODE_CHECK: "false"
   UPGRADE_TEST: "false"
   MITOGEN_ENABLE: "false"
   ANSIBLE_LOG_LEVEL: "-vv"
   RECOVER_CONTROL_PLANE_TEST: "false"
-  RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:]:kube_control_plane[1:]"
-  TERRAFORM_VERSION: 1.3.7
-  PIPELINE_IMAGE: "$CI_REGISTRY_IMAGE/pipeline:${CI_PIPELINE_ID}-${CI_COMMIT_SHORT_SHA}"
+  RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:],kube_control_plane[1:]"
+  TERRAFORM_VERSION: 1.0.8
+  ANSIBLE_MAJOR_VERSION: "2.10"
 
 before_script:
   - ./tests/scripts/rebase.sh
+  - update-alternatives --install /usr/bin/python python /usr/bin/python3 1
+  - python -m pip uninstall -y ansible ansible-base ansible-core
+  - python -m pip install -r tests/requirements-${ANSIBLE_MAJOR_VERSION}.txt
   - mkdir -p /.ssh
 
 .job: &job
   tags:
     - packet
-  image: $PIPELINE_IMAGE
+  image: quay.io/kubespray/kubespray:$KUBESPRAY_VERSION
   artifacts:
     when: always
     paths:
@@ -53,7 +54,6 @@ before_script:
 .testcases: &testcases
   <<: *job
   retry: 1
-  interruptible: true
   before_script:
     - update-alternatives --install /usr/bin/python python /usr/bin/python3 1
     - ./tests/scripts/rebase.sh
@@ -75,10 +75,8 @@ ci-authorized:
   only: []
 
 include:
-  - .gitlab-ci/build.yml
   - .gitlab-ci/lint.yml
   - .gitlab-ci/shellcheck.yml
   - .gitlab-ci/terraform.yml
   - .gitlab-ci/packet.yml
   - .gitlab-ci/vagrant.yml
-  - .gitlab-ci/molecule.yml

.gitlab-ci/build.yml

@@ -1,40 +0,0 @@
----
-.build:
-  stage: build
-  image:
-    name: moby/buildkit:rootless
-    entrypoint: [""]
-  variables:
-    BUILDKITD_FLAGS: --oci-worker-no-process-sandbox
-  before_script:
-    - mkdir ~/.docker
-    - echo "{\"auths\":{\"$CI_REGISTRY\":{\"username\":\"$CI_REGISTRY_USER\",\"password\":\"$CI_REGISTRY_PASSWORD\"}}}" > ~/.docker/config.json
-
-pipeline image:
-  extends: .build
-  script:
-    - |
-      buildctl-daemonless.sh build \
-        --frontend=dockerfile.v0 \
-        --local context=. \
-        --local dockerfile=. \
-        --opt filename=./pipeline.Dockerfile \
-        --output type=image,name=$PIPELINE_IMAGE,push=true \
-        --import-cache type=registry,ref=$CI_REGISTRY_IMAGE/pipeline:cache
-  rules:
-    - if: '$CI_COMMIT_REF_NAME != $CI_DEFAULT_BRANCH'
-
-pipeline image and build cache:
-  extends: .build
-  script:
-    - |
-      buildctl-daemonless.sh build \
-        --frontend=dockerfile.v0 \
-        --local context=. \
-        --local dockerfile=. \
-        --opt filename=./pipeline.Dockerfile \
-        --output type=image,name=$PIPELINE_IMAGE,push=true \
-        --import-cache type=registry,ref=$CI_REGISTRY_IMAGE/pipeline:cache \
-        --export-cache type=registry,ref=$CI_REGISTRY_IMAGE/pipeline:cache,mode=max
-  rules:
-    - if: '$CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH'

.gitlab-ci/lint.yml

@@ -14,7 +14,7 @@ vagrant-validate:
   stage: unit-tests
   tags: [light]
   variables:
-    VAGRANT_VERSION: 2.3.7
+    VAGRANT_VERSION: 2.2.19
   script:
     - ./tests/scripts/vagrant-validate.sh
   except: ['triggers', 'master']
@@ -23,16 +23,9 @@ ansible-lint:
   extends: .job
   stage: unit-tests
   tags: [light]
-  script:
-    - ansible-lint -v
-  except: ['triggers', 'master']
-
-jinja-syntax-check:
-  extends: .job
-  stage: unit-tests
-  tags: [light]
-  script:
-    - "find -name '*.j2' -exec tests/scripts/check-templates.py {} +"
+  # lint every yml/yaml file that looks like it contains Ansible plays
+  script: |-
+    grep -Rl '^- hosts: \|^  hosts: ' --include \*.yml --include \*.yaml . | xargs -P 4 -n 25 ansible-lint -v
   except: ['triggers', 'master']
 
 syntax-check:
@@ -47,34 +40,21 @@ syntax-check:
     ANSIBLE_VERBOSITY: "3"
   script:
     - ansible-playbook --syntax-check cluster.yml
-    - ansible-playbook --syntax-check playbooks/cluster.yml
     - ansible-playbook --syntax-check upgrade-cluster.yml
-    - ansible-playbook --syntax-check playbooks/upgrade_cluster.yml
     - ansible-playbook --syntax-check reset.yml
-    - ansible-playbook --syntax-check playbooks/reset.yml
     - ansible-playbook --syntax-check extra_playbooks/upgrade-only-k8s.yml
   except: ['triggers', 'master']
 
-collection-build-install-sanity-check:
-  extends: .job
-  stage: unit-tests
-  tags: [light]
-  variables:
-    ANSIBLE_COLLECTIONS_PATH: "./ansible_collections"
-  script:
-    - ansible-galaxy collection build
-    - ansible-galaxy collection install kubernetes_sigs-kubespray-$(grep "^version:" galaxy.yml | awk '{print $2}').tar.gz
-    - ansible-galaxy collection list $(egrep -i '(name:\s+|namespace:\s+)' galaxy.yml | awk '{print $2}' | tr '\n' '.' | sed 's|\.$||g') | grep "^kubernetes_sigs.kubespray"
-    - test -f ansible_collections/kubernetes_sigs/kubespray/playbooks/cluster.yml
-    - test -f ansible_collections/kubernetes_sigs/kubespray/playbooks/reset.yml
-  except: ['triggers', 'master']
-
 tox-inventory-builder:
   stage: unit-tests
   tags: [light]
   extends: .job
   before_script:
     - ./tests/scripts/rebase.sh
+    - apt-get update && apt-get install -y python3-pip
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
+    - python -m pip uninstall -y ansible
+    - python -m pip install -r tests/requirements.txt
   script:
     - pip3 install tox
     - cd contrib/inventory_builder && tox
@@ -89,27 +69,6 @@ markdownlint:
   script:
     - markdownlint $(find . -name '*.md' | grep -vF './.git') --ignore docs/_sidebar.md --ignore contrib/dind/README.md
 
-check-readme-versions:
-  stage: unit-tests
-  tags: [light]
-  image: python:3
-  script:
-    - tests/scripts/check_readme_versions.sh
-
-check-galaxy-version:
-  stage: unit-tests
-  tags: [light]
-  image: python:3
-  script:
-    - tests/scripts/check_galaxy_version.sh
-
-check-typo:
-  stage: unit-tests
-  tags: [light]
-  image: python:3
-  script:
-    - tests/scripts/check_typo.sh
-
 ci-matrix:
   stage: unit-tests
   tags: [light]

.gitlab-ci/molecule.yml

@@ -1,83 +0,0 @@
----
-
-.molecule:
-  tags: [c3.small.x86]
-  only: [/^pr-.*$/]
-  except: ['triggers']
-  image: $PIPELINE_IMAGE
-  services: []
-  stage: deploy-part1
-  before_script:
-    - tests/scripts/rebase.sh
-    - ./tests/scripts/vagrant_clean.sh
-  script:
-    - ./tests/scripts/molecule_run.sh
-  after_script:
-    - chronic ./tests/scripts/molecule_logs.sh
-  artifacts:
-    when: always
-    paths:
-      - molecule_logs/
-
-# CI template for periodic CI jobs
-# Enabled when PERIODIC_CI_ENABLED var is set
-.molecule_periodic:
-  only:
-    variables:
-      - $PERIODIC_CI_ENABLED
-  allow_failure: true
-  extends: .molecule
-
-molecule_full:
-  extends: .molecule_periodic
-
-molecule_no_container_engines:
-  extends: .molecule
-  script:
-    - ./tests/scripts/molecule_run.sh -e container-engine
-  when: on_success
-
-molecule_docker:
-  extends: .molecule
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/cri-dockerd
-  when: on_success
-
-molecule_containerd:
-  extends: .molecule
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/containerd
-  when: on_success
-
-molecule_cri-o:
-  extends: .molecule
-  stage: deploy-part2
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/cri-o
-  allow_failure: true
-  when: on_success
-
-# Stage 3 container engines don't get as much attention so allow them to fail
-molecule_kata:
-  extends: .molecule
-  stage: deploy-part3
-  allow_failure: true
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/kata-containers
-  when: on_success
-
-molecule_gvisor:
-  extends: .molecule
-  stage: deploy-part3
-  allow_failure: true
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/gvisor
-  when: on_success
-
-molecule_youki:
-  extends: .molecule
-  stage: deploy-part3
-  allow_failure: true
-  script:
-    - ./tests/scripts/molecule_run.sh -i container-engine/youki
-  when: on_success

.gitlab-ci/packet.yml

@@ -23,45 +23,44 @@
   allow_failure: true
   extends: .packet
 
-packet_cleanup_old:
-  stage: deploy-part1
-  extends: .packet_periodic
-  script:
-    - cd tests
-    - make cleanup-packet
-  after_script: []
-
-# The ubuntu20-calico-all-in-one jobs are meant as early stages to prevent running the full CI if something is horribly broken
-packet_ubuntu20-calico-all-in-one:
+# The ubuntu20-calico-aio jobs are meant as early stages to prevent running the full CI if something is horribly broken
+packet_ubuntu20-calico-aio:
   stage: deploy-part1
   extends: .packet_pr
   when: on_success
   variables:
     RESET_CHECK: "true"
 
+# Exericse ansible variants
+packet_ubuntu20-calico-aio-ansible-2_9:
+  stage: deploy-part1
+  extends: .packet_pr
+  when: on_success
+  variables:
+    ANSIBLE_MAJOR_VERSION: "2.9"
+    RESET_CHECK: "true"
+
+packet_ubuntu20-calico-aio-ansible-2_11:
+  stage: deploy-part1
+  extends: .packet_pr
+  when: on_success
+  variables:
+    ANSIBLE_MAJOR_VERSION: "2.11"
+    RESET_CHECK: "true"
+
 # ### PR JOBS PART2
 
-packet_ubuntu20-all-in-one-docker:
+packet_ubuntu18-aio-docker:
   stage: deploy-part2
   extends: .packet_pr
   when: on_success
 
-packet_ubuntu20-calico-all-in-one-hardening:
+packet_ubuntu20-aio-docker:
   stage: deploy-part2
   extends: .packet_pr
   when: on_success
 
-packet_ubuntu22-all-in-one-docker:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_ubuntu22-calico-all-in-one:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_ubuntu22-calico-etcd-datastore:
+packet_ubuntu18-calico-aio:
   stage: deploy-part2
   extends: .packet_pr
   when: on_success
@@ -75,19 +74,38 @@ packet_almalinux8-crio:
   extends: .packet_pr
   stage: deploy-part2
   when: on_success
-  allow_failure: true
 
-packet_ubuntu20-crio:
+packet_ubuntu18-crio:
   extends: .packet_pr
   stage: deploy-part2
   when: manual
 
-packet_fedora37-crio:
+packet_fedora35-crio:
   extends: .packet_pr
   stage: deploy-part2
   when: manual
 
-packet_ubuntu20-flannel-ha:
+packet_ubuntu16-canal-ha:
+  stage: deploy-part2
+  extends: .packet_periodic
+  when: on_success
+
+packet_ubuntu16-canal-sep:
+  stage: deploy-special
+  extends: .packet_pr
+  when: manual
+
+packet_ubuntu16-flannel-ha:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: manual
+
+packet_ubuntu16-kube-router-sep:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: manual
+
+packet_ubuntu16-kube-router-svc-proxy:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
@@ -117,21 +135,6 @@ packet_debian11-docker:
   extends: .packet_pr
   when: on_success
 
-packet_debian12-calico:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_debian12-docker:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_debian12-cilium:
-  stage: deploy-part2
-  extends: .packet_periodic
-  when: on_success
-
 packet_centos7-calico-ha-once-localhost:
   stage: deploy-part2
   extends: .packet_pr
@@ -144,7 +147,7 @@ packet_centos7-calico-ha-once-localhost:
 
 packet_almalinux8-kube-ovn:
   stage: deploy-part2
-  extends: .packet_pr
+  extends: .packet_periodic
   when: on_success
 
 packet_almalinux8-calico:
@@ -152,33 +155,25 @@ packet_almalinux8-calico:
   extends: .packet_pr
   when: on_success
 
-packet_rockylinux8-calico:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_rockylinux9-calico:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-
-packet_rockylinux9-cilium:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: on_success
-  variables:
-    RESET_CHECK: "true"
-
 packet_almalinux8-docker:
   stage: deploy-part2
   extends: .packet_pr
   when: on_success
 
-packet_fedora38-docker-weave:
+packet_fedora34-docker-weave:
   stage: deploy-part2
   extends: .packet_pr
   when: on_success
-  allow_failure: true
+
+packet_fedora35-kube-router:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: on_success
+
+packet_opensuse-canal:
+  stage: deploy-part2
+  extends: .packet_periodic
+  when: on_success
 
 packet_opensuse-docker-cilium:
   stage: deploy-part2
@@ -187,17 +182,22 @@ packet_opensuse-docker-cilium:
 
 # ### MANUAL JOBS
 
-packet_ubuntu20-docker-weave-sep:
+packet_ubuntu16-docker-weave-sep:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
 
-packet_ubuntu20-cilium-sep:
+packet_ubuntu18-cilium-sep:
   stage: deploy-special
   extends: .packet_pr
   when: manual
 
-packet_ubuntu20-flannel-ha-once:
+packet_ubuntu18-flannel-ha:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: manual
+
+packet_ubuntu18-flannel-ha-once:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
@@ -208,7 +208,7 @@ packet_almalinux8-calico-ha-ebpf:
   extends: .packet_pr
   when: manual
 
-packet_debian10-macvlan:
+packet_debian9-macvlan:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
@@ -218,29 +218,39 @@ packet_centos7-calico-ha:
   extends: .packet_pr
   when: manual
 
+packet_centos7-kube-router:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: manual
+
 packet_centos7-multus-calico:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
 
-packet_fedora38-docker-calico:
+packet_oracle7-canal-ha:
+  stage: deploy-part2
+  extends: .packet_pr
+  when: manual
+
+packet_fedora35-docker-calico:
   stage: deploy-part2
   extends: .packet_periodic
   when: on_success
   variables:
     RESET_CHECK: "true"
 
-packet_fedora37-calico-selinux:
+packet_fedora34-calico-selinux:
   stage: deploy-part2
   extends: .packet_periodic
   when: on_success
 
-packet_fedora37-calico-swap-selinux:
+packet_fedora35-calico-swap-selinux:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
 
-packet_amazon-linux-2-all-in-one:
+packet_amazon-linux-2-aio:
   stage: deploy-part2
   extends: .packet_pr
   when: manual
@@ -250,37 +260,15 @@ packet_almalinux8-calico-nodelocaldns-secondary:
   extends: .packet_pr
   when: manual
 
-packet_fedora38-kube-ovn:
+packet_fedora34-kube-ovn:
   stage: deploy-part2
   extends: .packet_periodic
   when: on_success
 
-packet_debian11-custom-cni:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: manual
-
-packet_debian11-kubelet-csr-approver:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: manual
-
-packet_debian12-custom-cni-helm:
-  stage: deploy-part2
-  extends: .packet_pr
-  when: manual
-
 # ### PR JOBS PART3
 # Long jobs (45min+)
 
-packet_centos7-weave-upgrade-ha:
-  stage: deploy-part3
-  extends: .packet_periodic
-  when: on_success
-  variables:
-    UPGRADE_TEST: basic
-
-packet_ubuntu20-calico-etcd-kubeadm-upgrade-ha:
+packet_centos7-docker-weave-upgrade-ha:
   stage: deploy-part3
   extends: .packet_periodic
   when: on_success
@@ -293,45 +281,32 @@ packet_ubuntu20-calico-ha-wireguard:
   extends: .packet_pr
   when: manual
 
-packet_debian11-calico-upgrade:
+packet_debian10-calico-upgrade:
   stage: deploy-part3
   extends: .packet_pr
   when: on_success
   variables:
     UPGRADE_TEST: graceful
 
-packet_almalinux8-calico-remove-node:
-  stage: deploy-part3
-  extends: .packet_pr
-  when: on_success
-  variables:
-    REMOVE_NODE_CHECK: "true"
-    REMOVE_NODE_NAME: "instance-3"
-
-packet_ubuntu20-calico-etcd-kubeadm:
-  stage: deploy-part3
-  extends: .packet_pr
-  when: on_success
-
-packet_debian11-calico-upgrade-once:
+packet_debian10-calico-upgrade-once:
   stage: deploy-part3
   extends: .packet_periodic
   when: on_success
   variables:
     UPGRADE_TEST: graceful
 
-packet_ubuntu20-calico-ha-recover:
+packet_ubuntu18-calico-ha-recover:
   stage: deploy-part3
   extends: .packet_periodic
   when: on_success
   variables:
     RECOVER_CONTROL_PLANE_TEST: "true"
-    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:]:kube_control_plane[1:]"
+    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:],kube_control_plane[1:]"
 
-packet_ubuntu20-calico-ha-recover-noquorum:
+packet_ubuntu18-calico-ha-recover-noquorum:
   stage: deploy-part3
   extends: .packet_periodic
   when: on_success
   variables:
     RECOVER_CONTROL_PLANE_TEST: "true"
-    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[1:]:kube_control_plane[1:]"
+    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[1:],kube_control_plane[1:]"

.gitlab-ci/shellcheck.yml

@@ -11,6 +11,6 @@ shellcheck:
     - cp shellcheck-"${SHELLCHECK_VERSION}"/shellcheck /usr/bin/
     - shellcheck --version
   script:
-    # Run shellcheck for all *.sh
-    - find . -name '*.sh' -not -path './.git/*' | xargs shellcheck --severity error
+    # Run shellcheck for all *.sh except contrib/
+    - find . -name '*.sh' -not -path './contrib/*' -not -path './.git/*' | xargs shellcheck --severity error
   except: ['triggers', 'master']

.gitlab-ci/terraform.yml

@@ -60,11 +60,11 @@ tf-validate-openstack:
     PROVIDER: openstack
     CLUSTER: $CI_COMMIT_REF_NAME
 
-tf-validate-equinix:
+tf-validate-packet:
   extends: .terraform_validate
   variables:
     TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: equinix
+    PROVIDER: packet
     CLUSTER: $CI_COMMIT_REF_NAME
 
 tf-validate-aws:
@@ -80,12 +80,6 @@ tf-validate-exoscale:
     TF_VERSION: $TERRAFORM_VERSION
     PROVIDER: exoscale
 
-tf-validate-hetzner:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: hetzner
-
 tf-validate-vsphere:
   extends: .terraform_validate
   variables:
@@ -100,13 +94,7 @@ tf-validate-upcloud:
     PROVIDER: upcloud
     CLUSTER: $CI_COMMIT_REF_NAME
 
-tf-validate-nifcloud:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: nifcloud
-
-# tf-packet-ubuntu20-default:
+# tf-packet-ubuntu16-default:
 #   extends: .terraform_apply
 #   variables:
 #     TF_VERSION: $TERRAFORM_VERSION
@@ -116,9 +104,23 @@ tf-validate-nifcloud:
 #     TF_VAR_number_of_k8s_nodes: "1"
 #     TF_VAR_plan_k8s_masters: t1.small.x86
 #     TF_VAR_plan_k8s_nodes: t1.small.x86
-#     TF_VAR_metro: am
+#     TF_VAR_facility: ewr1
 #     TF_VAR_public_key_path: ""
-#     TF_VAR_operating_system: ubuntu_20_04
+#     TF_VAR_operating_system: ubuntu_16_04
+#
+# tf-packet-ubuntu18-default:
+#   extends: .terraform_apply
+#   variables:
+#     TF_VERSION: $TERRAFORM_VERSION
+#     PROVIDER: packet
+#     CLUSTER: $CI_COMMIT_REF_NAME
+#     TF_VAR_number_of_k8s_masters: "1"
+#     TF_VAR_number_of_k8s_nodes: "1"
+#     TF_VAR_plan_k8s_masters: t1.small.x86
+#     TF_VAR_plan_k8s_nodes: t1.small.x86
+#     TF_VAR_facility: ams1
+#     TF_VAR_public_key_path: ""
+#     TF_VAR_operating_system: ubuntu_18_04
 
 .ovh_variables: &ovh_variables
   OS_AUTH_URL: https://auth.cloud.ovh.net/v3
@@ -156,7 +158,7 @@ tf-elastx_cleanup:
   script:
     - ./scripts/openstack-cleanup/main.py
 
-tf-elastx_ubuntu20-calico:
+tf-elastx_ubuntu18-calico:
   extends: .terraform_apply
   stage: deploy-part3
   when: on_success
@@ -186,7 +188,7 @@ tf-elastx_ubuntu20-calico:
     TF_VAR_az_list_node: '["sto1"]'
     TF_VAR_flavor_k8s_master: 3f73fc93-ec61-4808-88df-2580d94c1a9b    # v1-standard-2
     TF_VAR_flavor_k8s_node: 3f73fc93-ec61-4808-88df-2580d94c1a9b      # v1-standard-2
-    TF_VAR_image: ubuntu-20.04-server-latest
+    TF_VAR_image: ubuntu-18.04-server-latest
     TF_VAR_k8s_allowed_remote_ips: '["0.0.0.0/0"]'
 
 # OVH voucher expired, commenting job until things are sorted  out
@@ -203,7 +205,7 @@ tf-elastx_ubuntu20-calico:
 #  script:
 #    - ./scripts/openstack-cleanup/main.py
 
-# tf-ovh_ubuntu20-calico:
+# tf-ovh_ubuntu18-calico:
 #  extends: .terraform_apply
 #  when: on_success
 #  environment: ovh
@@ -229,5 +231,5 @@ tf-elastx_ubuntu20-calico:
 #    TF_VAR_network_name: "Ext-Net"
 #    TF_VAR_flavor_k8s_master: "defa64c3-bd46-43b4-858a-d93bbae0a229"    # s1-8
 #    TF_VAR_flavor_k8s_node: "defa64c3-bd46-43b4-858a-d93bbae0a229"      # s1-8
-#    TF_VAR_image: "Ubuntu 20.04"
+#    TF_VAR_image: "Ubuntu 18.04"
 #    TF_VAR_k8s_allowed_remote_ips: '["0.0.0.0/0"]'

.gitlab-ci/vagrant.yml

@@ -1,5 +1,28 @@
 ---
 
+molecule_tests:
+  tags: [c3.small.x86]
+  only: [/^pr-.*$/]
+  except: ['triggers']
+  image: quay.io/kubespray/vagrant:v2.18.0
+  services: []
+  stage: deploy-part1
+  before_script:
+    - tests/scripts/rebase.sh
+    - apt-get update && apt-get install -y python3-pip
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
+    - python -m pip uninstall -y ansible
+    - python -m pip install -r tests/requirements.txt
+    - ./tests/scripts/vagrant_clean.sh
+  script:
+    - ./tests/scripts/molecule_run.sh
+  after_script:
+    - chronic ./tests/scripts/molecule_logs.sh
+  artifacts:
+    when: always
+    paths:
+      - molecule_logs/
+
 .vagrant:
   extends: .testcases
   variables:
@@ -10,9 +33,13 @@
   tags: [c3.small.x86]
   only: [/^pr-.*$/]
   except: ['triggers']
-  image: $PIPELINE_IMAGE
+  image: quay.io/kubespray/vagrant:v2.18.0
   services: []
   before_script:
+    - apt-get update && apt-get install -y python3-pip
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
+    - python -m pip uninstall -y ansible
+    - python -m pip install -r tests/requirements.txt
     - ./tests/scripts/vagrant_clean.sh
   script:
     - ./tests/scripts/testcases_run.sh
@@ -20,12 +47,17 @@
     - chronic ./tests/scripts/testcases_cleanup.sh
   allow_failure: true
 
-vagrant_ubuntu20-calico-dual-stack:
+vagrant_ubuntu18-calico-dual-stack:
   stage: deploy-part2
   extends: .vagrant
   when: on_success
 
-vagrant_ubuntu20-weave-medium:
+vagrant_ubuntu18-flannel:
+  stage: deploy-part2
+  extends: .vagrant
+  when: on_success
+
+vagrant_ubuntu18-weave-medium:
   stage: deploy-part2
   extends: .vagrant
   when: manual
@@ -34,30 +66,3 @@ vagrant_ubuntu20-flannel:
   stage: deploy-part2
   extends: .vagrant
   when: on_success
-  allow_failure: false
-
-vagrant_ubuntu20-flannel-collection:
-  stage: deploy-part2
-  extends: .vagrant
-  when: on_success
-
-vagrant_ubuntu20-kube-router-sep:
-  stage: deploy-part2
-  extends: .vagrant
-  when: manual
-
-# Service proxy test fails connectivity testing
-vagrant_ubuntu20-kube-router-svc-proxy:
-  stage: deploy-part2
-  extends: .vagrant
-  when: manual
-
-vagrant_fedora37-kube-router:
-  stage: deploy-part2
-  extends: .vagrant
-  when: on_success
-
-vagrant_centos7-kube-router:
-  stage: deploy-part2
-  extends: .vagrant
-  when: manual

.markdownlint.yaml

@@ -1,3 +1,2 @@
 ---
 MD013: false
-MD029: false

.pre-commit-config.yaml

@@ -1,80 +0,0 @@
----
-repos:
-
-  - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v3.4.0
-    hooks:
-      - id: check-added-large-files
-      - id: check-case-conflict
-      - id: check-executables-have-shebangs
-      - id: check-xml
-      - id: check-merge-conflict
-      - id: detect-private-key
-      - id: end-of-file-fixer
-      - id: forbid-new-submodules
-      - id: requirements-txt-fixer
-      - id: trailing-whitespace
-
-  - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.27.1
-    hooks:
-      - id: yamllint
-        args: [--strict]
-
-  - repo: https://github.com/markdownlint/markdownlint
-    rev: v0.11.0
-    hooks:
-      - id: markdownlint
-        args: [ -r, "~MD013,~MD029" ]
-        exclude: "^.git"
-
-  - repo: https://github.com/jumanjihouse/pre-commit-hooks
-    rev: 3.0.0
-    hooks:
-      - id: shellcheck
-        args: [ --severity, "error" ]
-        exclude: "^.git"
-        files: "\\.sh$"
-
-  - repo: local
-    hooks:
-      - id: ansible-lint
-        name: ansible-lint
-        entry: ansible-lint -v
-        language: python
-        pass_filenames: false
-        additional_dependencies:
-          - .[community]
-
-      - id: ansible-syntax-check
-        name: ansible-syntax-check
-        entry: env ANSIBLE_INVENTORY=inventory/local-tests.cfg ANSIBLE_REMOTE_USER=root ANSIBLE_BECOME="true" ANSIBLE_BECOME_USER=root ANSIBLE_VERBOSITY="3" ansible-playbook --syntax-check
-        language: python
-        files: "^cluster.yml|^upgrade-cluster.yml|^reset.yml|^extra_playbooks/upgrade-only-k8s.yml"
-
-      - id: tox-inventory-builder
-        name: tox-inventory-builder
-        entry: bash -c "cd contrib/inventory_builder && tox"
-        language: python
-        pass_filenames: false
-
-      - id: check-readme-versions
-        name: check-readme-versions
-        entry: tests/scripts/check_readme_versions.sh
-        language: script
-        pass_filenames: false
-
-      - id: ci-matrix
-        name: ci-matrix
-        entry: tests/scripts/md-table/test.sh
-        language: script
-        pass_filenames: false
-
-      - id: jinja-syntax-check
-        name: jinja-syntax-check
-        entry: tests/scripts/check-templates.py
-        language: python
-        types:
-          - jinja
-        additional_dependencies:
-          - Jinja2

.yamllint

@@ -3,8 +3,6 @@ extends: default
 
 ignore: |
   .git/
-  # Generated file
-  tests/files/custom_cni/cilium.yaml
 
 rules:
   braces:

CHANGELOG.md

@@ -1 +0,0 @@
-# See our release notes on [GitHub](https://github.com/kubernetes-sigs/kubespray/releases)

CONTRIBUTING.md

@@ -12,17 +12,11 @@ To install development dependencies you can set up a python virtual env with the
 virtualenv venv
 source venv/bin/activate
 pip install -r tests/requirements.txt
-ansible-galaxy install -r tests/requirements.yml
 ```
 
 #### Linting
 
-Kubespray uses [pre-commit](https://pre-commit.com) hook configuration to run several linters, please install this tool and use it to run validation tests before submitting a PR.
-
-```ShellSession
-pre-commit install
-pre-commit run -a  # To run pre-commit hook on all files in the repository, even if they were not modified
-```
+Kubespray uses `yamllint` and `ansible-lint`. To run them locally use `yamllint .` and `ansible-lint`. It is a good idea to add call these tools as part of your pre-commit hook and avoid a lot of back end forth on fixing linting issues (<https://support.gitkraken.com/working-with-repositories/githooksexample/>).
 
 #### Molecule
 
@@ -39,9 +33,7 @@ Vagrant with VirtualBox or libvirt driver helps you to quickly spin test cluster
 1. Submit an issue describing your proposed change to the repo in question.
 2. The [repo owners](OWNERS) will respond to your issue promptly.
 3. Fork the desired repo, develop and test your code changes.
-4. Install [pre-commit](https://pre-commit.com) and install it in your development repo.
-5. Addess any pre-commit validation failures.
-6. Sign the CNCF CLA (<https://git.k8s.io/community/CLA.md#the-contributor-license-agreement>)
-7. Submit a pull request.
-8. Work with the reviewers on their suggestions.
-9. Ensure to rebase to the HEAD of your target branch and squash un-necessary commits (<https://blog.carbonfive.com/always-squash-and-rebase-your-git-commits/>) before final merger of your contribution.
+4. Sign the CNCF CLA (<https://git.k8s.io/community/CLA.md#the-contributor-license-agreement>)
+5. Submit a pull request.
+6. Work with the reviewers on their suggestions.
+7. Ensure to rebase to the HEAD of your target branch and squash un-necessary commits (<https://blog.carbonfive.com/always-squash-and-rebase-your-git-commits/>) before final merger of your contribution.

Dockerfile

@@ -1,52 +1,33 @@
-# syntax=docker/dockerfile:1
+# Use imutable image tags rather than mutable tags (like ubuntu:20.04)
+FROM ubuntu:focal-20220316
 
-# Use imutable image tags rather than mutable tags (like ubuntu:22.04)
-FROM ubuntu:22.04@sha256:149d67e29f765f4db62aa52161009e99e389544e25a8f43c8c89d4a445a7ca37
+RUN apt update -y \
+    && apt install -y \
+    libssl-dev python3-dev sshpass apt-transport-https jq moreutils \
+    ca-certificates curl gnupg2 software-properties-common python3-pip unzip rsync git \
+    && rm -rf /var/lib/apt/lists/*
+RUN curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - \
+    && add-apt-repository \
+    "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
+    $(lsb_release -cs) \
+    stable" \
+    && apt update -y && apt-get install --no-install-recommends -y docker-ce \
+    && rm -rf /var/lib/apt/lists/*
 
 # Some tools like yamllint need this
 # Pip needs this as well at the moment to install ansible
 # (and potentially other packages)
 # See: https://github.com/pypa/pip/issues/10219
-ENV LANG=C.UTF-8 \
-    DEBIAN_FRONTEND=noninteractive \
-    PYTHONDONTWRITEBYTECODE=1
+ENV LANG=C.UTF-8
 
 WORKDIR /kubespray
+COPY . .
+RUN /usr/bin/python3 -m pip install --no-cache-dir pip -U \
+    && /usr/bin/python3 -m pip install --no-cache-dir -r tests/requirements.txt \
+    && python3 -m pip install --no-cache-dir -r requirements.txt \
+    && update-alternatives --install /usr/bin/python python /usr/bin/python3 1
 
-# hadolint ignore=DL3008
-RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
-    apt-get update -q \
-    && apt-get install -yq --no-install-recommends \
-    curl \
-    python3 \
-    python3-pip \
-    sshpass \
-    vim \
-    rsync \
-    openssh-client \
-    && apt-get clean \
-    && rm -rf /var/lib/apt/lists/* /var/log/*
-
-RUN --mount=type=bind,source=requirements.txt,target=requirements.txt \
-    --mount=type=cache,sharing=locked,id=pipcache,mode=0777,target=/root/.cache/pip \
-    pip install --no-compile --no-cache-dir -r requirements.txt \
-    && find /usr -type d -name '*__pycache__' -prune -exec rm -rf {} \;
-
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
-RUN --mount=type=bind,source=roles/kubespray-defaults/defaults/main/main.yml,target=roles/kubespray-defaults/defaults/main/main.yml \
-    KUBE_VERSION=$(sed -n 's/^kube_version: //p' roles/kubespray-defaults/defaults/main/main.yml) \
-    OS_ARCHITECTURE=$(dpkg --print-architecture) \
-    && curl -L "https://dl.k8s.io/release/${KUBE_VERSION}/bin/linux/${OS_ARCHITECTURE}/kubectl" -o /usr/local/bin/kubectl \
-    && echo "$(curl -L "https://dl.k8s.io/release/${KUBE_VERSION}/bin/linux/${OS_ARCHITECTURE}/kubectl.sha256")" /usr/local/bin/kubectl | sha256sum --check \
-    && chmod a+x /usr/local/bin/kubectl
-
-COPY *.yml ./
-COPY *.cfg ./
-COPY roles ./roles
-COPY contrib ./contrib
-COPY inventory ./inventory
-COPY library ./library
-COPY extra_playbooks ./extra_playbooks
-COPY playbooks ./playbooks
-COPY plugins ./plugins
+RUN KUBE_VERSION=$(sed -n 's/^kube_version: //p' roles/kubespray-defaults/defaults/main.yaml) \
+    && curl -LO https://storage.googleapis.com/kubernetes-release/release/$KUBE_VERSION/bin/linux/amd64/kubectl \
+    && chmod a+x kubectl \
+    && mv kubectl /usr/local/bin/kubectl

OWNERS_ALIASES

@@ -4,13 +4,10 @@ aliases:
     - chadswen
     - mirwan
     - miouge1
+    - woopstar
     - luckysb
     - floryut
     - oomichi
-    - cristicalin
-    - liupeng0518
-    - yankay
-    - mzaian
   kubespray-reviewers:
     - holmsten
     - bozzo
@@ -18,15 +15,7 @@ aliases:
     - oomichi
     - jayonlau
     - cristicalin
-    - liupeng0518
-    - yankay
-    - cyclinder
-    - mzaian
-    - mrfreezeex
-    - erikjiang
-    - vannten
   kubespray-emeritus_approvers:
     - riverzhang
     - atoms
     - ant31
-    - woopstar

README.md

@@ -13,16 +13,16 @@ You can get your invite [here](http://slack.k8s.io/)
 
 ## Quick Start
 
-Below are several ways to use Kubespray to deploy a Kubernetes cluster.
+To deploy the cluster you can use :
 
 ### Ansible
 
 #### Usage
 
-Install Ansible according to [Ansible installation guide](/docs/ansible.md#installing-ansible)
-then run the following steps:
-
 ```ShellSession
+# Install dependencies from ``requirements.txt``
+sudo pip3 install -r requirements.txt
+
 # Copy ``inventory/sample`` as ``inventory/mycluster``
 cp -rfp inventory/sample inventory/mycluster
 
@@ -34,13 +34,6 @@ CONFIG_FILE=inventory/mycluster/hosts.yaml python3 contrib/inventory_builder/inv
 cat inventory/mycluster/group_vars/all/all.yml
 cat inventory/mycluster/group_vars/k8s_cluster/k8s-cluster.yml
 
-# Clean up old Kubernetes cluster with Ansible Playbook - run the playbook as root
-# The option `--become` is required, as for example cleaning up SSL keys in /etc/,
-# uninstalling old packages and interacting with various systemd daemons.
-# Without --become the playbook will fail to run!
-# And be mind it will remove the current kubernetes cluster (if it's running)!
-ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root reset.yml
-
 # Deploy Kubespray with Ansible Playbook - run the playbook as root
 # The option `--become` is required, as for example writing SSL keys in /etc/,
 # installing packages and interacting with various systemd daemons.
@@ -48,61 +41,44 @@ ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root
 ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root cluster.yml
 ```
 
-Note: When Ansible is already installed via system packages on the control node,
-Python packages installed via `sudo pip install -r requirements.txt` will go to
-a different directory tree (e.g. `/usr/local/lib/python2.7/dist-packages` on
-Ubuntu) from Ansible's (e.g. `/usr/lib/python2.7/dist-packages/ansible` still on
-Ubuntu). As a consequence, the `ansible-playbook` command will fail with:
+Note: When Ansible is already installed via system packages on the control machine, other python packages installed via `sudo pip install -r requirements.txt` will go to a different directory tree (e.g. `/usr/local/lib/python2.7/dist-packages` on Ubuntu) from Ansible's (e.g. `/usr/lib/python2.7/dist-packages/ansible` still on Ubuntu).
+As a consequence, `ansible-playbook` command will fail with:
 
 ```raw
 ERROR! no action detected in task. This often indicates a misspelled module name, or incorrect module path.
 ```
 
-This likely indicates that a task depends on a module present in ``requirements.txt``.
+probably pointing on a task depending on a module present in requirements.txt.
 
-One way of addressing this is to uninstall the system Ansible package then
-reinstall Ansible via ``pip``, but this not always possible and one must
-take care regarding package versions.
-A workaround consists of setting the `ANSIBLE_LIBRARY`
-and `ANSIBLE_MODULE_UTILS` environment variables respectively to
-the `ansible/modules` and `ansible/module_utils` subdirectories of the ``pip``
-installation location, which is the ``Location`` shown by running
-`pip show [package]` before executing `ansible-playbook`.
+One way of solving this would be to uninstall the Ansible package and then, to install it via pip but it is not always possible.
+A workaround consists of setting `ANSIBLE_LIBRARY` and `ANSIBLE_MODULE_UTILS` environment variables respectively to the `ansible/modules` and `ansible/module_utils` subdirectories of pip packages installation location, which can be found in the Location field of the output of `pip show [package]` before executing `ansible-playbook`.
 
-A simple way to ensure you get all the correct version of Ansible is to use
-the [pre-built docker image from Quay](https://quay.io/repository/kubespray/kubespray?tab=tags).
-You will then need to use [bind mounts](https://docs.docker.com/storage/bind-mounts/)
-to access the inventory and SSH key in the container, like this:
+A simple way to ensure you get all the correct version of Ansible is to use the [pre-built docker image from Quay](https://quay.io/repository/kubespray/kubespray?tab=tags).
+You will then need to use [bind mounts](https://docs.docker.com/storage/bind-mounts/) to get the inventory and ssh key into the container, like this:
 
 ```ShellSession
-git checkout v2.24.1
-docker pull quay.io/kubespray/kubespray:v2.24.1
+docker pull quay.io/kubespray/kubespray:v2.17.1
 docker run --rm -it --mount type=bind,source="$(pwd)"/inventory/sample,dst=/inventory \
   --mount type=bind,source="${HOME}"/.ssh/id_rsa,dst=/root/.ssh/id_rsa \
-  quay.io/kubespray/kubespray:v2.23.2 bash
+  quay.io/kubespray/kubespray:v2.17.1 bash
 # Inside the container you may now run the kubespray playbooks:
 ansible-playbook -i /inventory/inventory.ini --private-key /root/.ssh/id_rsa cluster.yml
 ```
 
-#### Collection
-
-See [here](docs/ansible_collection.md) if you wish to use this repository as an Ansible collection
-
 ### Vagrant
 
-For Vagrant we need to install Python dependencies for provisioning tasks.
-Check that ``Python`` and ``pip`` are installed:
+For Vagrant we need to install python dependencies for provisioning tasks.
+Check if Python and pip are installed:
 
 ```ShellSession
 python -V && pip -V
 ```
 
 If this returns the version of the software, you're good to go. If not, download and install Python from here <https://www.python.org/downloads/source/>
-
-Install Ansible according to [Ansible installation guide](/docs/ansible.md#installing-ansible)
-then run the following step:
+Install the necessary requirements
 
 ```ShellSession
+sudo pip install -r requirements.txt
 vagrant up
 ```
 
@@ -134,82 +110,64 @@ vagrant up
 - [Adding/replacing a node](docs/nodes.md)
 - [Upgrades basics](docs/upgrades.md)
 - [Air-Gap installation](docs/offline-environment.md)
-- [NTP](docs/ntp.md)
-- [Hardening](docs/hardening.md)
-- [Mirror](docs/mirror.md)
 - [Roadmap](docs/roadmap.md)
 
 ## Supported Linux Distributions
 
 - **Flatcar Container Linux by Kinvolk**
-- **Debian** Bookworm, Bullseye, Buster
-- **Ubuntu** 20.04, 22.04
-- **CentOS/RHEL** 7, [8, 9](docs/centos.md#centos-8)
-- **Fedora** 37, 38
+- **Debian** Bullseye, Buster, Jessie, Stretch
+- **Ubuntu** 16.04, 18.04, 20.04
+- **CentOS/RHEL** 7, [8](docs/centos8.md)
+- **Fedora** 34, 35
 - **Fedora CoreOS** (see [fcos Note](docs/fcos.md))
 - **openSUSE** Leap 15.x/Tumbleweed
-- **Oracle Linux** 7, [8, 9](docs/centos.md#centos-8)
-- **Alma Linux** [8, 9](docs/centos.md#centos-8)
-- **Rocky Linux** [8, 9](docs/centos.md#centos-8)
-- **Kylin Linux Advanced Server V10** (experimental: see [kylin linux notes](docs/kylinlinux.md))
+- **Oracle Linux** 7, [8](docs/centos8.md)
+- **Alma Linux** [8](docs/centos8.md)
+- **Rocky Linux** [8](docs/centos8.md)
 - **Amazon Linux 2** (experimental: see [amazon linux notes](docs/amazonlinux.md))
-- **UOS Linux** (experimental: see [uos linux notes](docs/uoslinux.md))
-- **openEuler** (experimental: see [openEuler notes](docs/openeuler.md))
 
 Note: Upstart/SysV init based OS types are not supported.
 
 ## Supported Components
 
 - Core
-  - [kubernetes](https://github.com/kubernetes/kubernetes) v1.28.6
-  - [etcd](https://github.com/etcd-io/etcd) v3.5.10
+  - [kubernetes](https://github.com/kubernetes/kubernetes) v1.22.8
+  - [etcd](https://github.com/coreos/etcd) v3.5.0
   - [docker](https://www.docker.com/) v20.10 (see note)
-  - [containerd](https://containerd.io/) v1.7.13
-  - [cri-o](http://cri-o.io/) v1.27 (experimental: see [CRI-O Note](docs/cri-o.md). Only on fedora, ubuntu and centos based OS)
+  - [containerd](https://containerd.io/) v1.5.8
+  - [cri-o](http://cri-o.io/) v1.22 (experimental: see [CRI-O Note](docs/cri-o.md). Only on fedora, ubuntu and centos based OS)
 - Network Plugin
-  - [cni-plugins](https://github.com/containernetworking/plugins) v1.2.0
-  - [calico](https://github.com/projectcalico/calico) v3.26.4
-  - [cilium](https://github.com/cilium/cilium) v1.13.4
-  - [flannel](https://github.com/flannel-io/flannel) v0.22.0
-  - [kube-ovn](https://github.com/alauda/kube-ovn) v1.11.5
-  - [kube-router](https://github.com/cloudnativelabs/kube-router) v2.0.0
-  - [multus](https://github.com/k8snetworkplumbingwg/multus-cni) v3.8
+  - [cni-plugins](https://github.com/containernetworking/plugins) v1.0.1
+  - [calico](https://github.com/projectcalico/calico) v3.20.3
+  - [canal](https://github.com/projectcalico/canal) (given calico/flannel versions)
+  - [cilium](https://github.com/cilium/cilium) v1.9.11
+  - [flanneld](https://github.com/flannel-io/flannel) v0.15.1
+  - [kube-ovn](https://github.com/alauda/kube-ovn) v1.8.1
+  - [kube-router](https://github.com/cloudnativelabs/kube-router) v1.3.2
+  - [multus](https://github.com/intel/multus-cni) v3.8
   - [weave](https://github.com/weaveworks/weave) v2.8.1
-  - [kube-vip](https://github.com/kube-vip/kube-vip) v0.5.12
 - Application
-  - [cert-manager](https://github.com/jetstack/cert-manager) v1.13.2
-  - [coredns](https://github.com/coredns/coredns) v1.10.1
-  - [ingress-nginx](https://github.com/kubernetes/ingress-nginx) v1.9.4
-  - [krew](https://github.com/kubernetes-sigs/krew) v0.4.4
-  - [argocd](https://argoproj.github.io/) v2.8.4
-  - [helm](https://helm.sh/) v3.13.1
-  - [metallb](https://metallb.universe.tf/)  v0.13.9
-  - [registry](https://github.com/distribution/distribution) v2.8.1
-- Storage Plugin
   - [cephfs-provisioner](https://github.com/kubernetes-incubator/external-storage) v2.1.0-k8s1.11
   - [rbd-provisioner](https://github.com/kubernetes-incubator/external-storage) v2.1.1-k8s1.11
-  - [aws-ebs-csi-plugin](https://github.com/kubernetes-sigs/aws-ebs-csi-driver) v0.5.0
-  - [azure-csi-plugin](https://github.com/kubernetes-sigs/azuredisk-csi-driver) v1.10.0
-  - [cinder-csi-plugin](https://github.com/kubernetes/cloud-provider-openstack/blob/master/docs/cinder-csi-plugin/using-cinder-csi-plugin.md) v1.22.0
-  - [gcp-pd-csi-plugin](https://github.com/kubernetes-sigs/gcp-compute-persistent-disk-csi-driver) v1.9.2
-  - [local-path-provisioner](https://github.com/rancher/local-path-provisioner) v0.0.24
-  - [local-volume-provisioner](https://github.com/kubernetes-sigs/sig-storage-local-static-provisioner) v2.5.0
+  - [cert-manager](https://github.com/jetstack/cert-manager) v1.5.4
+  - [coredns](https://github.com/coredns/coredns) v1.8.0
+  - [ingress-nginx](https://github.com/kubernetes/ingress-nginx) v1.0.4
 
 ## Container Runtime Notes
 
-- Supported Docker versions are 18.09, 19.03, 20.10, 23.0 and 24.0. The *recommended* Docker version is 20.10 (except on Debian bookworm which without supporting for 20.10 and below any more). `Kubelet` might break on docker's non-standard version numbering (it no longer uses semantic versioning). To ensure auto-updates don't break your cluster look into e.g. the YUM  ``versionlock`` plugin or ``apt pin``).
+- The list of available docker version is 18.09, 19.03 and 20.10. The recommended docker version is 20.10. The kubelet might break on docker's non-standard version numbering (it no longer uses semantic versioning). To ensure auto-updates don't break your cluster look into e.g. yum versionlock plugin or apt pin).
 - The cri-o version should be aligned with the respective kubernetes version (i.e. kube_version=1.20.x, crio_version=1.20)
 
 ## Requirements
 
-- **Minimum required version of Kubernetes is v1.26**
-- **Ansible v2.14+, Jinja 2.11+ and python-netaddr is installed on the machine that will run Ansible commands**
+- **Minimum required version of Kubernetes is v1.20**
+- **Ansible v2.9.x, Jinja 2.11+ and python-netaddr is installed on the machine that will run Ansible commands, Ansible 2.10.x is experimentally supported for now**
 - The target servers must have **access to the Internet** in order to pull docker images. Otherwise, additional configuration is required (See [Offline Environment](docs/offline-environment.md))
 - The target servers are configured to allow **IPv4 forwarding**.
 - If using IPv6 for pods and services, the target servers are configured to allow **IPv6 forwarding**.
 - The **firewalls are not managed**, you'll need to implement your own rules the way you used to.
     in order to avoid any issue during deployment you should disable your firewall.
-- If kubespray is run from non-root user account, correct privilege escalation method
+- If kubespray is ran from non-root user account, correct privilege escalation method
     should be configured in the target servers. Then the `ansible_become` flag
     or command parameters `--become or -b` should be specified.
 
@@ -223,15 +181,17 @@ These limits are safeguarded by Kubespray. Actual requirements for your workload
 
 ## Network Plugins
 
-You can choose among ten network plugins. (default: `calico`, except Vagrant uses `flannel`)
+You can choose between 10 network plugins. (default: `calico`, except Vagrant uses `flannel`)
 
 - [flannel](docs/flannel.md): gre/vxlan (layer 2) networking.
 
-- [Calico](https://docs.tigera.io/calico/latest/about/) is a networking and network policy provider. Calico supports a flexible set of networking options
+- [Calico](https://docs.projectcalico.org/latest/introduction/) is a networking and network policy provider. Calico supports a flexible set of networking options
     designed to give you the most efficient networking across a range of situations, including non-overlay
     and overlay networks, with or without BGP. Calico uses the same engine to enforce network policy for hosts,
     pods, and (if using Istio and Envoy) applications at the service mesh layer.
 
+- [canal](https://github.com/projectcalico/canal): a composition of calico and flannel plugins.
+
 - [cilium](http://docs.cilium.io/en/latest/): layer 3/4 networking (as well as layer 7 to protect and secure application protocols), supports dynamic insertion of BPF bytecode into the Linux kernel to implement security services, networking and visibility logic.
 
 - [weave](docs/weave.md): Weave is a lightweight container overlay network that doesn't require an external K/V database cluster.
@@ -248,10 +208,7 @@ You can choose among ten network plugins. (default: `calico`, except Vagrant use
 
 - [multus](docs/multus.md): Multus is a meta CNI plugin that provides multiple network interface support to pods. For each interface Multus delegates CNI calls to secondary CNI plugins such as Calico, macvlan, etc.
 
-- [custom_cni](roles/network-plugin/custom_cni/) : You can specify some manifests that will be applied to the clusters to bring you own CNI and use non-supported ones by Kubespray.
-  See `tests/files/custom_cni/README.md` and `tests/files/custom_cni/values.yaml`for an example with a CNI provided by a Helm Chart.
-
-The network plugin to use is defined by the variable `kube_network_plugin`. There is also an
+The choice is defined with the variable `kube_network_plugin`. There is also an
 option to leverage built-in cloud provider networking instead.
 See also [Network checker](docs/netcheck.md).
 
@@ -272,11 +229,10 @@ See also [Network checker](docs/netcheck.md).
 
 - [Digital Rebar Provision](https://github.com/digitalrebar/provision/blob/v4/doc/integrations/ansible.rst)
 - [Terraform Contrib](https://github.com/kubernetes-sigs/kubespray/tree/master/contrib/terraform)
-- [Kubean](https://github.com/kubean-io/kubean)
 
 ## CI Tests
 
-[![Build graphs](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/badges/master/pipeline.svg)](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/-/pipelines)
+[![Build graphs](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/badges/master/pipeline.svg)](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/pipelines)
 
 CI/end-to-end tests sponsored by: [CNCF](https://cncf.io), [Equinix Metal](https://metal.equinix.com/), [OVHcloud](https://www.ovhcloud.com/), [ELASTX](https://elastx.se/).
 

RELEASE.md

@@ -2,18 +2,17 @@
 
 The Kubespray Project is released on an as-needed basis. The process is as follows:
 
-1. An issue is proposing a new release with a changelog since the last release. Please see [a good sample issue](https://github.com/kubernetes-sigs/kubespray/issues/8325)
+1. An issue is proposing a new release with a changelog since the last release
 2. At least one of the [approvers](OWNERS_ALIASES) must approve this release
 3. The `kube_version_min_required` variable is set to `n-1`
-4. Remove hashes for [EOL versions](https://github.com/kubernetes/website/blob/main/content/en/releases/patch-releases.md) of kubernetes from `*_checksums` variables.
-5. Create the release note with [Kubernetes Release Notes Generator](https://github.com/kubernetes/release/blob/master/cmd/release-notes/README.md). See the following `Release note creation` section for the details.
-6. An approver creates [new release in GitHub](https://github.com/kubernetes-sigs/kubespray/releases/new) using a version and tag name like `vX.Y.Z` and attaching the release notes
-7. An approver creates a release branch in the form `release-X.Y`
-8. The corresponding version of [quay.io/kubespray/kubespray:vX.Y.Z](https://quay.io/repository/kubespray/kubespray) and [quay.io/kubespray/vagrant:vX.Y.Z](https://quay.io/repository/kubespray/vagrant) container images are built and tagged. See the following `Container image creation` section for the details.
-9. The `KUBESPRAY_VERSION` variable is updated in `.gitlab-ci.yml`
-10. The release issue is closed
-11. An announcement email is sent to `dev@kubernetes.io` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
-12. The topic of the #kubespray channel is updated with `vX.Y.Z is released! | ...`
+4. Remove hashes for [EOL versions](https://github.com/kubernetes/sig-release/blob/master/releases/patch-releases.md) of kubernetes from `*_checksums` variables.
+5. An approver creates [new release in GitHub](https://github.com/kubernetes-sigs/kubespray/releases/new) using a version and tag name like `vX.Y.Z` and attaching the release notes
+6. An approver creates a release branch in the form `release-X.Y`
+7. The corresponding version of [quay.io/kubespray/kubespray:vX.Y.Z](https://quay.io/repository/kubespray/kubespray) and [quay.io/kubespray/vagrant:vX.Y.Z](https://quay.io/repository/kubespray/vagrant) docker images are built and tagged
+8. The `KUBESPRAY_VERSION` variable is updated in `.gitlab-ci.yml`
+9. The release issue is closed
+10. An announcement email is sent to `kubernetes-dev@googlegroups.com` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
+11. The topic of the #kubespray channel is updated with `vX.Y.Z is released! | ...`
 
 ## Major/minor releases and milestones
 
@@ -47,37 +46,3 @@ The Kubespray Project is released on an as-needed basis. The process is as follo
   then Kubespray v2.1.0 may be bound to only minor changes to `kube_version`, like v1.5.1
   and *any* changes to other components, like etcd v4, or calico 1.2.3.
   And Kubespray v3.x.x shall be bound to `kube_version: 2.x.x` respectively.
-
-## Release note creation
-
-You can create a release note with:
-
-```shell
-export GITHUB_TOKEN=<your-github-token>
-export ORG=kubernetes-sigs
-export REPO=kubespray
-release-notes --start-sha <The start commit-id> --end-sha <The end commit-id> --dependencies=false --output=/tmp/kubespray-release-note --required-author=""
-```
-
-If the release note file(/tmp/kubespray-release-note) contains "### Uncategorized" pull requests, those pull requests don't have a valid kind label(`kind/feature`, etc.).
-It is necessary to put a valid label on each pull request and run the above release-notes command again to get a better release note
-
-## Container image creation
-
-The container image `quay.io/kubespray/kubespray:vX.Y.Z` can be created from Dockerfile of the kubespray root directory:
-
-```shell
-cd kubespray/
-nerdctl build -t quay.io/kubespray/kubespray:vX.Y.Z .
-nerdctl push quay.io/kubespray/kubespray:vX.Y.Z
-```
-
-The container image `quay.io/kubespray/vagrant:vX.Y.Z` can be created from build.sh of test-infra/vagrant-docker/:
-
-```shell
-cd kubespray/test-infra/vagrant-docker/
-./build vX.Y.Z
-```
-
-Please note that the above operation requires the permission to push container images into quay.io/kubespray/.
-If you don't have the permission, please ask it on the #kubespray-dev channel.

SECURITY_CONTACTS

@@ -9,7 +9,5 @@
 #
 # DO NOT REPORT SECURITY VULNERABILITIES DIRECTLY TO THESE NAMES, FOLLOW THE
 # INSTRUCTIONS AT https://kubernetes.io/security/
+atoms
 mattymo
-floryut
-oomichi
-cristicalin

Vagrantfile

@@ -19,18 +19,18 @@ SUPPORTED_OS = {
   "flatcar-beta"        => {box: "flatcar-beta",               user: "core", box_url: FLATCAR_URL_TEMPLATE % ["beta"]},
   "flatcar-alpha"       => {box: "flatcar-alpha",              user: "core", box_url: FLATCAR_URL_TEMPLATE % ["alpha"]},
   "flatcar-edge"        => {box: "flatcar-edge",               user: "core", box_url: FLATCAR_URL_TEMPLATE % ["edge"]},
+  "ubuntu1604"          => {box: "generic/ubuntu1604",         user: "vagrant"},
+  "ubuntu1804"          => {box: "generic/ubuntu1804",         user: "vagrant"},
   "ubuntu2004"          => {box: "generic/ubuntu2004",         user: "vagrant"},
-  "ubuntu2204"          => {box: "generic/ubuntu2204",         user: "vagrant"},
   "centos"              => {box: "centos/7",                   user: "vagrant"},
   "centos-bento"        => {box: "bento/centos-7.6",           user: "vagrant"},
   "centos8"             => {box: "centos/8",                   user: "vagrant"},
   "centos8-bento"       => {box: "bento/centos-8",             user: "vagrant"},
   "almalinux8"          => {box: "almalinux/8",                user: "vagrant"},
   "almalinux8-bento"    => {box: "bento/almalinux-8",          user: "vagrant"},
-  "rockylinux8"         => {box: "generic/rocky8",             user: "vagrant"},
-  "fedora37"            => {box: "fedora/37-cloud-base",       user: "vagrant"},
-  "fedora38"            => {box: "fedora/38-cloud-base",       user: "vagrant"},
-  "opensuse"            => {box: "opensuse/Leap-15.4.x86_64",  user: "vagrant"},
+  "fedora34"            => {box: "fedora/34-cloud-base",       user: "vagrant"},
+  "fedora35"            => {box: "fedora/35-cloud-base",       user: "vagrant"},
+  "opensuse"            => {box: "bento/opensuse-leap-15.2",   user: "vagrant"},
   "opensuse-tumbleweed" => {box: "opensuse/Tumbleweed.x86_64", user: "vagrant"},
   "oraclelinux"         => {box: "generic/oracle7",            user: "vagrant"},
   "oraclelinux8"        => {box: "generic/oracle8",            user: "vagrant"},
@@ -52,16 +52,16 @@ $shared_folders ||= {}
 $forwarded_ports ||= {}
 $subnet ||= "172.18.8"
 $subnet_ipv6 ||= "fd3c:b398:0698:0756"
-$os ||= "ubuntu2004"
+$os ||= "ubuntu1804"
 $network_plugin ||= "flannel"
-# Setting multi_networking to true will install Multus: https://github.com/k8snetworkplumbingwg/multus-cni
-$multi_networking ||= "False"
+# Setting multi_networking to true will install Multus: https://github.com/intel/multus-cni
+$multi_networking ||= false
 $download_run_once ||= "True"
 $download_force_cache ||= "False"
 # The first three nodes are etcd servers
-$etcd_instances ||= [$num_instances, 3].min
+$etcd_instances ||= $num_instances
 # The first two nodes are kube masters
-$kube_master_instances ||= [$num_instances, 2].min
+$kube_master_instances ||= $num_instances == 1 ? $num_instances : ($num_instances - 1)
 # All nodes are kube nodes
 $kube_node_instances ||= $num_instances
 # The following only works when using the libvirt provider
@@ -70,24 +70,14 @@ $kube_node_instances_with_disks_size ||= "20G"
 $kube_node_instances_with_disks_number ||= 2
 $override_disk_size ||= false
 $disk_size ||= "20GB"
-$local_path_provisioner_enabled ||= "False"
+$local_path_provisioner_enabled ||= false
 $local_path_provisioner_claim_root ||= "/opt/local-path-provisioner/"
 $libvirt_nested ||= false
-# boolean or string (e.g. "-vvv")
-$ansible_verbosity ||= false
-$ansible_tags ||= ENV['VAGRANT_ANSIBLE_TAGS'] || ""
 
 $playbook ||= "cluster.yml"
 
 host_vars = {}
 
-# throw error if os is not supported
-if ! SUPPORTED_OS.key?($os)
-  puts "Unsupported OS: #{$os}"
-  puts "Supported OS are: #{SUPPORTED_OS.keys.join(', ')}"
-  exit 1
-end
-
 $box = SUPPORTED_OS[$os][:box]
 # if $inventory is not set, try to use example
 $inventory = "inventory/sample" if ! $inventory
@@ -179,7 +169,7 @@ Vagrant.configure("2") do |config|
           # always make /dev/sd{a/b/c} so that CI can ensure that
           # virtualbox and libvirt will have the same devices to use for OSDs
           (1..$kube_node_instances_with_disks_number).each do |d|
-            lv.storage :file, :device => "hd#{driverletters[d]}", :path => "disk-#{i}-#{d}-#{DISK_UUID}.disk", :size => $kube_node_instances_with_disks_size, :bus => "scsi"
+            lv.storage :file, :device => "hd#{driverletters[d]}", :path => "disk-#{i}-#{d}-#{DISK_UUID}.disk", :size => $kube_node_instances_with_disks_size, :bus => "ide"
           end
         end
       end
@@ -207,8 +197,7 @@ Vagrant.configure("2") do |config|
       end
 
       ip = "#{$subnet}.#{i+100}"
-      node.vm.network :private_network,
-        :ip => ip,
+      node.vm.network :private_network, ip: ip,
         :libvirt__guest_ipv6 => 'yes',
         :libvirt__ipv6_address => "#{$subnet_ipv6}::#{i+100}",
         :libvirt__ipv6_prefix => "64",
@@ -218,22 +207,14 @@ Vagrant.configure("2") do |config|
       # Disable swap for each vm
       node.vm.provision "shell", inline: "swapoff -a"
 
-      # ubuntu2004 and ubuntu2204 have IPv6 explicitly disabled. This undoes that.
-      if ["ubuntu2004", "ubuntu2204"].include? $os
+      # ubuntu1804 and ubuntu2004 have IPv6 explicitly disabled. This undoes that.
+      if ["ubuntu1804", "ubuntu2004"].include? $os
         node.vm.provision "shell", inline: "rm -f /etc/modprobe.d/local.conf"
         node.vm.provision "shell", inline: "sed -i '/net.ipv6.conf.all.disable_ipv6/d' /etc/sysctl.d/99-sysctl.conf /etc/sysctl.conf"
       end
-      # Hack for fedora37/38 to get the IP address of the second interface
-      if ["fedora37", "fedora38"].include? $os
-        config.vm.provision "shell", inline: <<-SHELL
-          nmcli conn modify 'Wired connection 2' ipv4.addresses $(cat /etc/sysconfig/network-scripts/ifcfg-eth1 | grep IPADDR | cut -d "=" -f2)
-          nmcli conn modify 'Wired connection 2' ipv4.method manual
-          service NetworkManager restart
-        SHELL
-      end
 
       # Disable firewalld on oraclelinux/redhat vms
-      if ["oraclelinux","oraclelinux8","rhel7","rhel8","rockylinux8"].include? $os
+      if ["oraclelinux","oraclelinux8","rhel7","rhel8"].include? $os
         node.vm.provision "shell", inline: "systemctl stop firewalld; systemctl disable firewalld"
       end
 
@@ -259,12 +240,9 @@ Vagrant.configure("2") do |config|
       }
 
       # Only execute the Ansible provisioner once, when all the machines are up and ready.
-      # And limit the action to gathering facts, the full playbook is going to be ran by testcases_run.sh
       if i == $num_instances
         node.vm.provision "ansible" do |ansible|
           ansible.playbook = $playbook
-          ansible.compatibility_mode = "2.0"
-          ansible.verbose = $ansible_verbosity
           $ansible_inventory_path = File.join( $inventory, "hosts.ini")
           if File.exist?($ansible_inventory_path)
             ansible.inventory_path = $ansible_inventory_path
@@ -274,9 +252,7 @@ Vagrant.configure("2") do |config|
           ansible.host_key_checking = false
           ansible.raw_arguments = ["--forks=#{$num_instances}", "--flush-cache", "-e ansible_become_pass=vagrant"]
           ansible.host_vars = host_vars
-          if $ansible_tags != ""
-            ansible.tags = [$ansible_tags]
-          end
+          #ansible.tags = ['download']
           ansible.groups = {
             "etcd" => ["#{$instance_name_prefix}-[1:#{$etcd_instances}]"],
             "kube_control_plane" => ["#{$instance_name_prefix}-[1:#{$kube_master_instances}]"],

ansible.cfg

@@ -1,6 +1,6 @@
 [ssh_connection]
 pipelining=True
-ansible_ssh_args = -o ControlMaster=auto -o ControlPersist=30m -o ConnectionAttempts=100 -o UserKnownHostsFile=/dev/null
+ssh_args = -o ControlMaster=auto -o ControlPersist=30m -o ConnectionAttempts=100 -o UserKnownHostsFile=/dev/null
 #control_path = ~/.ssh/ansible-%%r@%%h:%%p
 [defaults]
 # https://github.com/ansible/ansible/issues/56930 (to ignore group names with - and .)
@@ -10,11 +10,11 @@ host_key_checking=False
 gathering = smart
 fact_caching = jsonfile
 fact_caching_connection = /tmp
-fact_caching_timeout = 86400
+fact_caching_timeout = 7200
 stdout_callback = default
 display_skipped_hosts = no
 library = ./library
-callbacks_enabled = profile_tasks,ara_default
+callback_whitelist = profile_tasks
 roles_path = roles:$VIRTUAL_ENV/usr/local/share/kubespray/roles:$VIRTUAL_ENV/usr/local/share/ansible/roles:/usr/share/kubespray/roles
 deprecation_warnings=False
 inventory_ignore_extensions = ~, .orig, .bak, .ini, .cfg, .retry, .pyc, .pyo, .creds, .gpg

ansible_version.yml

@@ -1,23 +1,34 @@
 ---
-- name: Check Ansible version
-  hosts: localhost
+- hosts: localhost
   gather_facts: false
   become: no
   vars:
-    minimal_ansible_version: 2.15.5  # 2.15 versions before 2.15.5 are known to be buggy for kubespray
-    maximal_ansible_version: 2.17.0
+    minimal_ansible_version: 2.9.0
+    minimal_ansible_version_2_10: 2.10.11
+    maximal_ansible_version: 2.12.0
     ansible_connection: local
   tags: always
   tasks:
     - name: "Check {{ minimal_ansible_version }} <= Ansible version < {{ maximal_ansible_version }}"
       assert:
-        msg: "Ansible must be between {{ minimal_ansible_version }} and {{ maximal_ansible_version }} exclusive - you have {{ ansible_version.string }}"
+        msg: "Ansible must be between {{ minimal_ansible_version }} and {{ maximal_ansible_version }}"
         that:
           - ansible_version.string is version(minimal_ansible_version, ">=")
           - ansible_version.string is version(maximal_ansible_version, "<")
       tags:
         - check
 
+    - name: "Check Ansible version > {{ minimal_ansible_version_2_10 }} when using ansible 2.10"
+      assert:
+        msg: "When using Ansible 2.10, the minimum supported version is {{ minimal_ansible_version_2_10 }}"
+        that:
+          - ansible_version.string is version(minimal_ansible_version_2_10, ">=")
+          - ansible_version.string is version(maximal_ansible_version, "<")
+      when:
+        - ansible_version.string is version('2.10.0', ">=")
+      tags:
+        - check
+
     - name: "Check that python netaddr is installed"
       assert:
         msg: "Python netaddr is not present"

cluster.yml

@@ -1,3 +1,127 @@
 ---
-- name: Install Kubernetes
-  ansible.builtin.import_playbook: playbooks/cluster.yml
+- name: Check ansible version
+  import_playbook: ansible_version.yml
+
+- name: Ensure compatibility with old groups
+  import_playbook: legacy_groups.yml
+
+- hosts: bastion[0]
+  gather_facts: False
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: bastion-ssh-config, tags: ["localhost", "bastion"] }
+
+- hosts: k8s_cluster:etcd
+  strategy: linear
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  gather_facts: false
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: bootstrap-os, tags: bootstrap-os}
+
+- name: Gather facts
+  tags: always
+  import_playbook: facts.yml
+
+- hosts: k8s_cluster:etcd
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/preinstall, tags: preinstall }
+    - { role: "container-engine", tags: "container-engine", when: deploy_container_engine }
+    - { role: download, tags: download, when: "not skip_downloads" }
+
+- hosts: etcd
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - role: etcd
+      tags: etcd
+      vars:
+        etcd_cluster_setup: true
+        etcd_events_cluster_setup: "{{ etcd_events_cluster_enabled }}"
+      when: not etcd_kubeadm_enabled| default(false)
+
+- hosts: k8s_cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - role: etcd
+      tags: etcd
+      vars:
+        etcd_cluster_setup: false
+        etcd_events_cluster_setup: false
+      when: not etcd_kubeadm_enabled| default(false)
+
+- hosts: k8s_cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/node, tags: node }
+
+- hosts: kube_control_plane
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/control-plane, tags: master }
+    - { role: kubernetes/client, tags: client }
+    - { role: kubernetes-apps/cluster_roles, tags: cluster-roles }
+
+- hosts: k8s_cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/kubeadm, tags: kubeadm}
+    - { role: kubernetes/node-label, tags: node-label }
+    - { role: network_plugin, tags: network }
+
+- hosts: calico_rr
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: network_plugin/calico/rr, tags: ['network', 'calico_rr'] }
+
+- hosts: kube_control_plane[0]
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: win_nodes/kubernetes_patch, tags: ["master", "win_nodes"] }
+
+- hosts: kube_control_plane
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes-apps/external_cloud_controller, tags: external-cloud-controller }
+    - { role: kubernetes-apps/network_plugin, tags: network }
+    - { role: kubernetes-apps/policy_controller, tags: policy-controller }
+    - { role: kubernetes-apps/ingress_controller, tags: ingress-controller }
+    - { role: kubernetes-apps/external_provisioner, tags: external-provisioner }
+    - { role: kubernetes-apps, tags: apps }
+
+- hosts: k8s_cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  environment: "{{ proxy_disable_env }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/preinstall, when: "dns_mode != 'none' and resolvconf_mode == 'host_resolvconf'", tags: resolvconf, dns_late: true }

contrib/aws_inventory/kubespray-aws-inventory.py

@@ -39,7 +39,7 @@ class SearchEC2Tags(object):
       hosts[group] = []
       tag_key = "kubespray-role"
       tag_value = ["*"+group+"*"]
-      region = os.environ['AWS_REGION']
+      region = os.environ['REGION']
 
       ec2 = boto3.resource('ec2', region)
       filters = [{'Name': 'tag:'+tag_key, 'Values': tag_value}, {'Name': 'instance-state-name', 'Values': ['running']}]
@@ -67,11 +67,6 @@ class SearchEC2Tags(object):
         if node_labels_tag:
           ansible_host['node_labels'] = dict([ label.strip().split('=') for label in node_labels_tag[0]['Value'].split(',') ])
 
-        ##Set when instance actually has node_taints
-        node_taints_tag = list(filter(lambda t: t['Key'] == 'kubespray-node-taints', instance.tags))
-        if node_taints_tag:
-          ansible_host['node_taints'] = list([ taint.strip() for taint in node_taints_tag[0]['Value'].split(',') ])
-
         hosts[group].append(dns_name)
         hosts['_meta']['hostvars'][dns_name] = ansible_host
 

contrib/azurerm/README.md

@@ -47,10 +47,6 @@ If you need to delete all resources from a resource group, simply call:
 
 **WARNING** this really deletes everything from your resource group, including everything that was later created by you!
 
-## Installing Ansible and the dependencies
-
-Install Ansible according to [Ansible installation guide](/docs/ansible.md#installing-ansible)
-
 ## Generating an inventory for kubespray
 
 After you have applied the templates, you can generate an inventory with this call:
@@ -63,5 +59,6 @@ It will create the file ./inventory which can then be used with kubespray, e.g.:
 
 ```shell
 cd kubespray-root-dir
+sudo pip3 install -r requirements.txt
 ansible-playbook -i contrib/azurerm/inventory -u devops --become -e "@inventory/sample/group_vars/all/all.yml" cluster.yml
 ```

contrib/azurerm/generate-inventory.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure inventory
-  hosts: localhost
+- hosts: localhost
   gather_facts: False
   roles:
     - generate-inventory

contrib/azurerm/generate-inventory_2.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure inventory
-  hosts: localhost
+- hosts: localhost
   gather_facts: False
   roles:
     - generate-inventory_2

contrib/azurerm/generate-templates.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure templates
-  hosts: localhost
+- hosts: localhost
   gather_facts: False
   roles:
     - generate-templates

contrib/azurerm/roles/generate-inventory/tasks/main.yml

@@ -1,6 +1,6 @@
 ---
 
-- name: Query Azure VMs
+- name: Query Azure VMs  # noqa 301
   command: azure vm list-ip-address --json {{ azure_resource_group }}
   register: vm_list_cmd
 

contrib/azurerm/roles/generate-inventory_2/tasks/main.yml

@@ -1,14 +1,14 @@
 ---
 
-- name: Query Azure VMs IPs
+- name: Query Azure VMs IPs  # noqa 301
   command: az vm list-ip-addresses -o json --resource-group {{ azure_resource_group }}
   register: vm_ip_list_cmd
 
-- name: Query Azure VMs Roles
+- name: Query Azure VMs Roles  # noqa 301
   command: az vm list -o json --resource-group {{ azure_resource_group }}
   register: vm_list_cmd
 
-- name: Query Azure Load Balancer Public IP
+- name: Query Azure Load Balancer Public IP  # noqa 301
   command: az network public-ip show -o json -g {{ azure_resource_group }} -n kubernetes-api-pubip
   register: lb_pubip_cmd
 

contrib/azurerm/roles/generate-inventory_2/templates/inventory.j2

@@ -31,3 +31,4 @@
 [k8s_cluster:children]
 kube_node
 kube_control_plane
+

contrib/dind/dind-cluster.yaml

@@ -1,11 +1,9 @@
 ---
-- name: Create nodes as docker containers
-  hosts: localhost
+- hosts: localhost
   gather_facts: False
   roles:
     - { role: dind-host }
 
-- name: Customize each node containers
-  hosts: containers
+- hosts: containers
   roles:
     - { role: dind-cluster }

contrib/dind/roles/dind-cluster/tasks/main.yaml

@@ -1,9 +1,9 @@
 ---
-- name: Set_fact distro_setup
+- name: set_fact distro_setup
   set_fact:
     distro_setup: "{{ distro_settings[node_distro] }}"
 
-- name: Set_fact other distro settings
+- name: set_fact other distro settings
   set_fact:
     distro_user: "{{ distro_setup['user'] }}"
     distro_ssh_service: "{{ distro_setup['ssh_service'] }}"
@@ -43,7 +43,7 @@
   package:
     name: "{{ item }}"
     state: present
-  with_items: "{{ distro_extra_packages + ['rsyslog', 'openssh-server'] }}"
+  with_items: "{{ distro_extra_packages }} + [ 'rsyslog', 'openssh-server' ]"
 
 - name: Start needed services
   service:
@@ -66,8 +66,8 @@
     dest: "/etc/sudoers.d/{{ distro_user }}"
     mode: 0640
 
-- name: "Add my pubkey to {{ distro_user }} user authorized keys"
-  ansible.posix.authorized_key:
+- name: Add my pubkey to "{{ distro_user }}" user authorized keys
+  authorized_key:
     user: "{{ distro_user }}"
     state: present
     key: "{{ lookup('file', lookup('env','HOME') + '/.ssh/id_rsa.pub') }}"

contrib/dind/roles/dind-host/tasks/main.yaml

@@ -1,9 +1,9 @@
 ---
-- name: Set_fact distro_setup
+- name: set_fact distro_setup
   set_fact:
     distro_setup: "{{ distro_settings[node_distro] }}"
 
-- name: Set_fact other distro settings
+- name: set_fact other distro settings
   set_fact:
     distro_image: "{{ distro_setup['image'] }}"
     distro_init: "{{ distro_setup['init'] }}"
@@ -13,7 +13,7 @@
     distro_agetty_svc: "{{ distro_setup['agetty_svc'] }}"
 
 - name: Create dind node containers from "containers" inventory section
-  community.docker.docker_container:
+  docker_container:
     image: "{{ distro_image }}"
     name: "{{ item }}"
     state: started
@@ -69,7 +69,7 @@
 
 # Running systemd-machine-id-setup doesn't create a unique id for each node container on Debian,
 # handle manually
-- name: Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)
+- name: Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)  # noqa 301
   raw: |
     echo {{ item | hash('sha1') }} > /etc/machine-id.new
     mv -b /etc/machine-id.new /etc/machine-id
@@ -79,6 +79,7 @@
   with_items: "{{ containers.results }}"
 
 - name: Early hack image install to adapt for DIND
+  # noqa 302 - this task uses the raw module intentionally
   raw: |
     rm -fv /usr/bin/udevadm /usr/sbin/udevadm
   delegate_to: "{{ item._ansible_item_label|default(item.item) }}"

contrib/dind/run-test-distros.sh

@@ -17,7 +17,7 @@ pass_or_fail() {
 test_distro() {
     local distro=${1:?};shift
     local extra="${*:-}"
-    local prefix="${distro[${extra}]}"
+    local prefix="$distro[${extra}]}"
     ansible-playbook -i hosts dind-cluster.yaml -e node_distro=$distro
     pass_or_fail "$prefix: dind-nodes" || return 1
     (cd ../..
@@ -71,15 +71,15 @@ for spec in ${SPECS}; do
     echo "Loading file=${spec} ..."
     . ${spec} || continue
     : ${DISTROS:?} || continue
-    echo "DISTROS:" "${DISTROS[@]}"
+    echo "DISTROS=${DISTROS[@]}"
     echo "EXTRAS->"
     printf "  %s\n" "${EXTRAS[@]}"
     let n=1
-    for distro in "${DISTROS[@]}"; do
+    for distro in ${DISTROS[@]}; do
         for extra in "${EXTRAS[@]:-NULL}"; do
             # Magic value to let this for run once:
             [[ ${extra} == NULL ]] && unset extra
-            docker rm -f "${NODES[@]}"
+            docker rm -f ${NODES[@]}
             printf -v file_out "%s/%s-%02d.out" ${OUTPUT_DIR} ${spec} $((n++))
             {
                 info "${distro}[${extra}] START: file_out=${file_out}"

contrib/inventory_builder/inventory.py

@@ -83,15 +83,11 @@ class KubesprayInventory(object):
         self.config_file = config_file
         self.yaml_config = {}
         loadPreviousConfig = False
-        printHostnames = False
         # See whether there are any commands to process
         if changed_hosts and changed_hosts[0] in AVAILABLE_COMMANDS:
             if changed_hosts[0] == "add":
                 loadPreviousConfig = True
                 changed_hosts = changed_hosts[1:]
-            elif changed_hosts[0] == "print_hostnames":
-                loadPreviousConfig = True
-                printHostnames = True
             else:
                 self.parse_command(changed_hosts[0], changed_hosts[1:])
                 sys.exit(0)
@@ -109,10 +105,6 @@ class KubesprayInventory(object):
                 print(e)
                 sys.exit(1)
 
-        if printHostnames:
-            self.print_hostnames()
-            sys.exit(0)
-
         self.ensure_required_groups(ROLES)
 
         if changed_hosts:

contrib/inventory_builder/requirements.txt

@@ -1,3 +1,3 @@
 configparser>=3.3.0
-ipaddress
 ruamel.yaml>=0.15.88
+ipaddress

contrib/inventory_builder/test-requirements.txt

@@ -1,3 +1,3 @@
 hacking>=0.10.2
-mock>=1.3.0
 pytest>=2.8.0
+mock>=1.3.0

contrib/inventory_builder/tests/test_inventory.py

@@ -13,7 +13,6 @@
 # under the License.
 
 import inventory
-from io import StringIO
 import unittest
 from unittest import mock
 
@@ -27,28 +26,6 @@ if path not in sys.path:
 import inventory  # noqa
 
 
-class TestInventoryPrintHostnames(unittest.TestCase):
-
-    @mock.patch('ruamel.yaml.YAML.load')
-    def test_print_hostnames(self, load_mock):
-        mock_io = mock.mock_open(read_data='')
-        load_mock.return_value = OrderedDict({'all': {'hosts': {
-            'node1': {'ansible_host': '10.90.0.2',
-                      'ip': '10.90.0.2',
-                      'access_ip': '10.90.0.2'},
-            'node2': {'ansible_host': '10.90.0.3',
-                      'ip': '10.90.0.3',
-                      'access_ip': '10.90.0.3'}}}})
-        with mock.patch('builtins.open', mock_io):
-            with self.assertRaises(SystemExit) as cm:
-                with mock.patch('sys.stdout', new_callable=StringIO) as stdout:
-                    inventory.KubesprayInventory(
-                        changed_hosts=["print_hostnames"],
-                        config_file="file")
-            self.assertEqual("node1 node2\n", stdout.getvalue())
-            self.assertEqual(cm.exception.code, 0)
-
-
 class TestInventory(unittest.TestCase):
     @mock.patch('inventory.sys')
     def setUp(self, sys_mock):

contrib/inventory_builder/tox.ini

@@ -1,27 +1,21 @@
 [tox]
 minversion = 1.6
 skipsdist = True
-envlist = pep8
+envlist = pep8, py33
 
 [testenv]
-allowlist_externals = py.test
+whitelist_externals = py.test
 usedevelop = True
 deps =
     -r{toxinidir}/requirements.txt
     -r{toxinidir}/test-requirements.txt
 setenv = VIRTUAL_ENV={envdir}
-passenv =
-    http_proxy
-    HTTP_PROXY
-    https_proxy
-    HTTPS_PROXY
-    no_proxy
-    NO_PROXY
+passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
 commands = pytest -vv #{posargs:./tests}
 
 [testenv:pep8]
 usedevelop = False
-allowlist_externals = bash
+whitelist_externals = bash
 commands =
     bash -c "find {toxinidir}/* -type f -name '*.py' -print0 | xargs -0 flake8"
 

contrib/kvm-setup/group_vars/all

@@ -1,2 +1,3 @@
 #k8s_deployment_user: kubespray
 #k8s_deployment_user_pkey_path: /tmp/ssh_rsa
+

contrib/kvm-setup/kvm-setup.yml

@@ -1,9 +1,8 @@
 ---
-- name: Prepare Hypervisor to later install kubespray VMs
-  hosts: localhost
+- hosts: localhost
   gather_facts: False
   become: yes
   vars:
-    bootstrap_os: none
+    - bootstrap_os: none
   roles:
-    - { role: kvm-setup }
+    - kvm-setup

contrib/kvm-setup/roles/kvm-setup/tasks/main.yml

@@ -22,9 +22,9 @@
     - ntp
   when: ansible_os_family == "Debian"
 
-- name: Create deployment user if required
-  include_tasks: user.yml
+# Create deployment user if required
+- include: user.yml
   when: k8s_deployment_user is defined
 
-- name: Set proper sysctl values
-  import_tasks: sysctl.yml
+# Set proper sysctl values
+- include: sysctl.yml

contrib/kvm-setup/roles/kvm-setup/tasks/sysctl.yml

@@ -1,6 +1,6 @@
 ---
 - name: Load br_netfilter module
-  community.general.modprobe:
+  modprobe:
     name: br_netfilter
     state: present
   register: br_netfilter
@@ -25,19 +25,19 @@
 
 
 - name: Enable net.ipv4.ip_forward in sysctl
-  ansible.posix.sysctl:
+  sysctl:
     name: net.ipv4.ip_forward
     value: 1
-    sysctl_file: "{{ sysctl_file_path }}"
+    sysctl_file: /etc/sysctl.d/ipv4-ip_forward.conf
     state: present
     reload: yes
 
 - name: Set bridge-nf-call-{arptables,iptables} to 0
-  ansible.posix.sysctl:
+  sysctl:
     name: "{{ item }}"
     state: present
     value: 0
-    sysctl_file: "{{ sysctl_file_path }}"
+    sysctl_file: /etc/sysctl.d/bridge-nf-call.conf
     reload: yes
   with_items:
     - net.bridge.bridge-nf-call-arptables

contrib/network-storage/glusterfs/glusterfs.yml

@@ -1,29 +1,24 @@
 ---
-- name: Bootstrap hosts
-  hosts: gfs-cluster
+- hosts: gfs-cluster
   gather_facts: false
   vars:
     ansible_ssh_pipelining: false
   roles:
     - { role: bootstrap-os, tags: bootstrap-os}
 
-- name: Gather facts
-  hosts: all
+- hosts: all
   gather_facts: true
 
-- name: Install glusterfs server
-  hosts: gfs-cluster
+- hosts: gfs-cluster
   vars:
     ansible_ssh_pipelining: true
   roles:
     - { role: glusterfs/server }
 
-- name: Install glusterfs servers
-  hosts: k8s_cluster
+- hosts: k8s_cluster
   roles:
     - { role: glusterfs/client }
 
-- name: Configure Kubernetes to use glusterfs
-  hosts: kube_control_plane[0]
+- hosts: kube_control_plane[0]
   roles:
     - { role: kubernetes-pv }

contrib/network-storage/glusterfs/inventory.example

@@ -41,3 +41,4 @@
 
 # [network-storage:children]
 # gfs-cluster
+

contrib/network-storage/glusterfs/roles/glusterfs/README.md

@@ -14,16 +14,12 @@ This role performs basic installation and setup of Gluster, but it does not conf
 
 Available variables are listed below, along with default values (see `defaults/main.yml`):
 
-```yaml
     glusterfs_default_release: ""
-```
 
 You can specify a `default_release` for apt on Debian/Ubuntu by overriding this variable. This is helpful if you need a different package or version for the main GlusterFS packages (e.g. GlusterFS 3.5.x instead of 3.2.x with the `wheezy-backports` default release on Debian Wheezy).
 
-```yaml
     glusterfs_ppa_use: yes
     glusterfs_ppa_version: "3.5"
-```
 
 For Ubuntu, specify whether to use the official Gluster PPA, and which version of the PPA to use. See Gluster's [Getting Started Guide](https://docs.gluster.org/en/latest/Quick-Start-Guide/Quickstart/) for more info.
 
@@ -33,11 +29,9 @@ None.
 
 ## Example Playbook
 
-```yaml
     - hosts: server
       roles:
         - geerlingguy.glusterfs
-```
 
 For a real-world use example, read through [Simple GlusterFS Setup with Ansible](http://www.jeffgeerling.com/blog/simple-glusterfs-setup-ansible), a blog post by this role's author, which is included in Chapter 8 of [Ansible for DevOps](https://www.ansiblefordevops.com/).
 

contrib/network-storage/glusterfs/roles/glusterfs/client/meta/main.yml

@@ -6,12 +6,12 @@ galaxy_info:
   description: GlusterFS installation for Linux.
   company: "Midwestern Mac, LLC"
   license: "license (BSD, MIT)"
-  min_ansible_version: "2.0"
+  min_ansible_version: 2.0
   platforms:
   - name: EL
     versions:
-    - "6"
-    - "7"
+    - 6
+    - 7
   - name: Ubuntu
     versions:
     - precise

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/main.yml

@@ -3,19 +3,14 @@
 # hyperkube and needs to be installed as part of the system.
 
 # Setup/install tasks.
-- name: Setup RedHat distros for glusterfs
-  include_tasks: setup-RedHat.yml
+- include: setup-RedHat.yml
   when: ansible_os_family == 'RedHat' and groups['gfs-cluster'] is defined
 
-- name: Setup Debian distros for glusterfs
-  include_tasks: setup-Debian.yml
+- include: setup-Debian.yml
   when: ansible_os_family == 'Debian' and groups['gfs-cluster'] is defined
 
 - name: Ensure Gluster mount directories exist.
-  file:
-    path: "{{ item }}"
-    state: directory
-    mode: 0775
+  file: "path={{ item }} state=directory mode=0775"
   with_items:
     - "{{ gluster_mount_dir }}"
   when: ansible_os_family in ["Debian","RedHat"] and groups['gfs-cluster'] is defined

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/setup-Debian.yml

@@ -7,7 +7,7 @@
   register: glusterfs_ppa_added
   when: glusterfs_ppa_use
 
-- name: Ensure GlusterFS client will reinstall if the PPA was just added.  # noqa no-handler
+- name: Ensure GlusterFS client will reinstall if the PPA was just added.  # noqa 503
   apt:
     name: "{{ item }}"
     state: absent

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/setup-RedHat.yml

@@ -1,14 +1,10 @@
 ---
 - name: Install Prerequisites
-  package:
-    name: "{{ item }}"
-    state: present
+  package: name={{ item }}  state=present
   with_items:
     - "centos-release-gluster{{ glusterfs_default_release }}"
 
 - name: Install Packages
-  package:
-    name: "{{ item }}"
-    state: present
+  package: name={{ item }}  state=present
   with_items:
     - glusterfs-client

contrib/network-storage/glusterfs/roles/glusterfs/server/meta/main.yml

@@ -6,12 +6,12 @@ galaxy_info:
   description: GlusterFS installation for Linux.
   company: "Midwestern Mac, LLC"
   license: "license (BSD, MIT)"
-  min_ansible_version: "2.0"
+  min_ansible_version: 2.0
   platforms:
   - name: EL
     versions:
-    - "6"
-    - "7"
+    - 6
+    - 7
   - name: Ubuntu
     versions:
     - precise

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/main.yml

@@ -4,58 +4,40 @@
   include_vars: "{{ ansible_os_family }}.yml"
 
 # Install xfs package
-- name: Install xfs Debian
-  apt:
-    name: xfsprogs
-    state: present
+- name: install xfs Debian
+  apt: name=xfsprogs state=present
   when: ansible_os_family == "Debian"
 
-- name: Install xfs RedHat
-  package:
-    name: xfsprogs
-    state: present
+- name: install xfs RedHat
+  package: name=xfsprogs state=present
   when: ansible_os_family == "RedHat"
 
 # Format external volumes in xfs
 - name: Format volumes in xfs
-  community.general.filesystem:
-    fstype: xfs
-    dev: "{{ disk_volume_device_1 }}"
+  filesystem: "fstype=xfs dev={{ disk_volume_device_1 }}"
 
 # Mount external volumes
-- name: Mounting new xfs filesystem
-  ansible.posix.mount:
-    name: "{{ gluster_volume_node_mount_dir }}"
-    src: "{{ disk_volume_device_1 }}"
-    fstype: xfs
-    state: mounted
+- name: mounting new xfs filesystem
+  mount: "name={{ gluster_volume_node_mount_dir }} src={{ disk_volume_device_1 }} fstype=xfs state=mounted"
 
 # Setup/install tasks.
-- name: Setup RedHat distros for glusterfs
-  include_tasks: setup-RedHat.yml
+- include: setup-RedHat.yml
   when: ansible_os_family == 'RedHat'
 
-- name: Setup Debian distros for glusterfs
-  include_tasks: setup-Debian.yml
+- include: setup-Debian.yml
   when: ansible_os_family == 'Debian'
 
 - name: Ensure GlusterFS is started and enabled at boot.
-  service:
-    name: "{{ glusterfs_daemon }}"
-    state: started
-    enabled: yes
+  service: "name={{ glusterfs_daemon }} state=started enabled=yes"
 
 - name: Ensure Gluster brick and mount directories exist.
-  file:
-    path: "{{ item }}"
-    state: directory
-    mode: 0775
+  file: "path={{ item }} state=directory mode=0775"
   with_items:
     - "{{ gluster_brick_dir }}"
     - "{{ gluster_mount_dir }}"
 
 - name: Configure Gluster volume with replicas
-  gluster.gluster.gluster_volume:
+  gluster_volume:
     state: present
     name: "{{ gluster_brick_name }}"
     brick: "{{ gluster_brick_dir }}"
@@ -67,7 +49,7 @@
   when: groups['gfs-cluster']|length > 1
 
 - name: Configure Gluster volume without replicas
-  gluster.gluster.gluster_volume:
+  gluster_volume:
     state: present
     name: "{{ gluster_brick_name }}"
     brick: "{{ gluster_brick_dir }}"
@@ -78,7 +60,7 @@
   when: groups['gfs-cluster']|length <= 1
 
 - name: Mount glusterfs to retrieve disk size
-  ansible.posix.mount:
+  mount:
     name: "{{ gluster_mount_dir }}"
     src: "{{ ip|default(ansible_default_ipv4['address']) }}:/gluster"
     fstype: glusterfs
@@ -87,8 +69,7 @@
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Get Gluster disk size
-  setup:
-    filter: ansible_mounts
+  setup: filter=ansible_mounts
   register: mounts_data
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
@@ -105,7 +86,7 @@
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Unmount glusterfs
-  ansible.posix.mount:
+  mount:
     name: "{{ gluster_mount_dir }}"
     fstype: glusterfs
     src: "{{ ip|default(ansible_default_ipv4['address']) }}:/gluster"

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/setup-Debian.yml

@@ -7,7 +7,7 @@
   register: glusterfs_ppa_added
   when: glusterfs_ppa_use
 
-- name: Ensure GlusterFS will reinstall if the PPA was just added.  # noqa no-handler
+- name: Ensure GlusterFS will reinstall if the PPA was just added.  # noqa 503
   apt:
     name: "{{ item }}"
     state: absent

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/setup-RedHat.yml

@@ -1,15 +1,11 @@
 ---
 - name: Install Prerequisites
-  package:
-    name: "{{ item }}"
-    state: present
+  package: name={{ item }}  state=present
   with_items:
     - "centos-release-gluster{{ glusterfs_default_release }}"
 
 - name: Install Packages
-  package:
-    name: "{{ item }}"
-    state: present
+  package: name={{ item }}  state=present
   with_items:
     - glusterfs-server
     - glusterfs-client

contrib/network-storage/glusterfs/roles/kubernetes-pv/ansible/tasks/main.yaml

@@ -3,7 +3,6 @@
   template:
     src: "{{ item.file }}"
     dest: "{{ kube_config_dir }}/{{ item.dest }}"
-    mode: 0644
   with_items:
     - { file: glusterfs-kubernetes-endpoint.json.j2, type: ep, dest: glusterfs-kubernetes-endpoint.json}
     - { file: glusterfs-kubernetes-pv.yml.j2, type: pv, dest: glusterfs-kubernetes-pv.yml}

contrib/network-storage/glusterfs/roles/kubernetes-pv/ansible/templates/glusterfs-kubernetes-endpoint.json.j2

@@ -21,3 +21,4 @@
     {% endfor %}
   ]
 }
+

contrib/network-storage/heketi/heketi-tear-down.yml

@@ -1,11 +1,9 @@
 ---
-- name: Tear down heketi
-  hosts: kube_control_plane[0]
+- hosts: kube_control_plane[0]
   roles:
     - { role: tear-down }
 
-- name: Teardown disks in heketi
-  hosts: heketi-node
+- hosts: heketi-node
   become: yes
   roles:
     - { role: tear-down-disks }

contrib/network-storage/heketi/heketi.yml

@@ -1,11 +1,9 @@
 ---
-- name: Prepare heketi install
-  hosts: heketi-node
+- hosts: heketi-node
   roles:
     - { role: prepare }
 
-- name: Provision heketi
-  hosts: kube_control_plane[0]
+- hosts: kube_control_plane[0]
   tags:
     - "provision"
   roles:

contrib/network-storage/heketi/roles/prepare/tasks/main.yml

@@ -5,7 +5,7 @@
     - "dm_snapshot"
     - "dm_mirror"
     - "dm_thin_pool"
-  community.general.modprobe:
+  modprobe:
     name: "{{ item }}"
     state: "present"
 

contrib/network-storage/heketi/roles/provision/handlers/main.yml

@@ -1,3 +1,3 @@
 ---
-- name: "Stop port forwarding"
+- name: "stop port forwarding"
   command: "killall "

contrib/network-storage/heketi/roles/provision/tasks/bootstrap/tear-down.yml

@@ -6,7 +6,7 @@
 - name: "Delete bootstrap Heketi."
   command: "{{ bin_dir }}/kubectl delete all,service,jobs,deployment,secret --selector=\"deploy-heketi\""
   when: "heketi_resources.stdout|from_json|json_query('items[*]')|length > 0"
-- name: "Ensure there is nothing left over."
+- name: "Ensure there is nothing left over."  # noqa 301
   command: "{{ bin_dir }}/kubectl get all,service,jobs,deployment,secret --selector=\"deploy-heketi\" -o=json"
   register: "heketi_result"
   until: "heketi_result.stdout|from_json|json_query('items[*]')|length == 0"

contrib/network-storage/heketi/roles/provision/tasks/bootstrap/topology.yml

@@ -14,7 +14,7 @@
 - name: "Copy topology configuration into container."
   changed_when: false
   command: "{{ bin_dir }}/kubectl cp {{ kube_config_dir }}/topology.json {{ initial_heketi_pod_name }}:/tmp/topology.json"
-- name: "Load heketi topology."  # noqa no-handler
+- name: "Load heketi topology."  # noqa 503
   when: "render.changed"
   command: "{{ bin_dir }}/kubectl exec {{ initial_heketi_pod_name }} -- heketi-cli --user admin --secret {{ heketi_admin_key }} topology load --json=/tmp/topology.json"
   register: "load_heketi"

contrib/network-storage/heketi/roles/provision/tasks/bootstrap/volumes.yml

@@ -18,7 +18,7 @@
 - name: "Provision database volume."
   command: "{{ bin_dir }}/kubectl exec {{ initial_heketi_pod_name }} -- heketi-cli --user admin --secret {{ heketi_admin_key }} setup-openshift-heketi-storage"
   when: "heketi_database_volume_exists is undefined"
-- name: "Copy configuration from pod."
+- name: "Copy configuration from pod."  # noqa 301
   become: true
   command: "{{ bin_dir }}/kubectl cp {{ initial_heketi_pod_name }}:/heketi-storage.json {{ kube_config_dir }}/heketi-storage-bootstrap.json"
 - name: "Get heketi volume ids."

contrib/network-storage/heketi/roles/provision/tasks/topology.yml

@@ -11,10 +11,10 @@
     src: "topology.json.j2"
     dest: "{{ kube_config_dir }}/topology.json"
     mode: 0644
-- name: "Copy topology configuration into container."  # noqa no-handler
+- name: "Copy topology configuration into container."  # noqa 503
   when: "rendering.changed"
   command: "{{ bin_dir }}/kubectl cp {{ kube_config_dir }}/topology.json {{ heketi_pod_name }}:/tmp/topology.json"
-- name: "Load heketi topology."  # noqa no-handler
+- name: "Load heketi topology."  # noqa 503
   when: "rendering.changed"
   command: "{{ bin_dir }}/kubectl exec {{ heketi_pod_name }} -- heketi-cli --user admin --secret {{ heketi_admin_key }} topology load --json=/tmp/topology.json"
 - name: "Get heketi topology."

contrib/network-storage/heketi/roles/tear-down-disks/tasks/main.yml

@@ -22,7 +22,7 @@
   ignore_errors: true   # noqa ignore-errors
   changed_when: false
 
-- name: "Remove volume groups."
+- name: "Remove volume groups."  # noqa 301
   environment:
     PATH: "{{ ansible_env.PATH }}:/sbin"  # Make sure we can workaround RH / CentOS conservative path management
   become: true
@@ -30,7 +30,7 @@
   with_items: "{{ volume_groups.stdout_lines }}"
   loop_control: { loop_var: "volume_group" }
 
-- name: "Remove physical volume from cluster disks."
+- name: "Remove physical volume from cluster disks."  # noqa 301
   environment:
     PATH: "{{ ansible_env.PATH }}:/sbin"  # Make sure we can workaround RH / CentOS conservative path management
   become: true

contrib/network-storage/heketi/roles/tear-down/tasks/main.yml

@@ -1,43 +1,43 @@
 ---
-- name: Remove storage class.
+- name: Remove storage class.  # noqa 301
   command: "{{ bin_dir }}/kubectl delete storageclass gluster"
   ignore_errors: true  # noqa ignore-errors
-- name: Tear down heketi.
+- name: Tear down heketi.  # noqa 301
   command: "{{ bin_dir }}/kubectl delete all,service,jobs,deployment,secret --selector=\"glusterfs=heketi-pod\""
   ignore_errors: true  # noqa ignore-errors
-- name: Tear down heketi.
+- name: Tear down heketi.  # noqa 301
   command: "{{ bin_dir }}/kubectl delete all,service,jobs,deployment,secret --selector=\"glusterfs=heketi-deployment\""
   ignore_errors: true  # noqa ignore-errors
 - name: Tear down bootstrap.
   include_tasks: "../../provision/tasks/bootstrap/tear-down.yml"
-- name: Ensure there is nothing left over.
+- name: Ensure there is nothing left over.  # noqa 301
   command: "{{ bin_dir }}/kubectl get all,service,jobs,deployment,secret --selector=\"glusterfs=heketi-pod\" -o=json"
   register: "heketi_result"
   until: "heketi_result.stdout|from_json|json_query('items[*]')|length == 0"
   retries: 60
   delay: 5
-- name: Ensure there is nothing left over.
+- name: Ensure there is nothing left over.  # noqa 301
   command: "{{ bin_dir }}/kubectl get all,service,jobs,deployment,secret --selector=\"glusterfs=heketi-deployment\" -o=json"
   register: "heketi_result"
   until: "heketi_result.stdout|from_json|json_query('items[*]')|length == 0"
   retries: 60
   delay: 5
-- name: Tear down glusterfs.
+- name: Tear down glusterfs.  # noqa 301
   command: "{{ bin_dir }}/kubectl delete daemonset.extensions/glusterfs"
   ignore_errors: true  # noqa ignore-errors
-- name: Remove heketi storage service.
+- name: Remove heketi storage service.  # noqa 301
   command: "{{ bin_dir }}/kubectl delete service heketi-storage-endpoints"
   ignore_errors: true  # noqa ignore-errors
-- name: Remove heketi gluster role binding
+- name: Remove heketi gluster role binding  # noqa 301
   command: "{{ bin_dir }}/kubectl delete clusterrolebinding heketi-gluster-admin"
   ignore_errors: true  # noqa ignore-errors
-- name: Remove heketi config secret
+- name: Remove heketi config secret  # noqa 301
   command: "{{ bin_dir }}/kubectl delete secret heketi-config-secret"
   ignore_errors: true  # noqa ignore-errors
-- name: Remove heketi db backup
+- name: Remove heketi db backup  # noqa 301
   command: "{{ bin_dir }}/kubectl delete secret heketi-db-backup"
   ignore_errors: true  # noqa ignore-errors
-- name: Remove heketi service account
+- name: Remove heketi service account  # noqa 301
   command: "{{ bin_dir }}/kubectl delete serviceaccount heketi-service-account"
   ignore_errors: true  # noqa ignore-errors
 - name: Get secrets

contrib/offline/README.md

@@ -5,14 +5,11 @@
 Container image collecting script for offline deployment
 
 This script has two features:
-
 (1) Get container images from an environment which is deployed online.
-
 (2) Deploy local container registry and register the container images to the registry.
 
 Step(1) should be done online site as a preparation, then we bring the gotten images
-to the target offline environment. if images are from a private registry,
-you need to set `PRIVATE_REGISTRY` environment variable.
+to the target offline environment.
 Then we will run step(2) for registering the images to local registry.
 
 Step(1) can be operated with:
@@ -29,7 +26,7 @@ manage-offline-container-images.sh   register
 
 ## generate_list.sh
 
-This script generates the list of downloaded files and the list of container images by `roles/kubespray-defaults/defaults/main/download.yml` file.
+This script generates the list of downloaded files and the list of container images by `roles/download/defaults/main.yml` file.
 
 Run this script will execute `generate_list.yml` playbook in kubespray root directory and generate four files,
 all downloaded files url in files.list, all container images in images.list, jinja2 templates in *.template.
@@ -47,21 +44,3 @@ temp
 
 In some cases you may want to update some component version, you can declare version variables in ansible inventory file or group_vars,
 then run `./generate_list.sh -i [inventory_file]` to update file.list and images.list.
-
-## manage-offline-files.sh
-
-This script will download all files according to `temp/files.list` and run nginx container to provide offline file download.
-
-Step(1) generate `files.list`
-
-```shell
-./generate_list.sh
-```
-
-Step(2) download files and run nginx container
-
-```shell
-./manage-offline-files.sh
-```
-
-when nginx container is running, it can be accessed through <http://127.0.0.1:8080/>.

contrib/offline/generate_list.sh

@@ -5,7 +5,7 @@ CURRENT_DIR=$(cd $(dirname $0); pwd)
 TEMP_DIR="${CURRENT_DIR}/temp"
 REPO_ROOT_DIR="${CURRENT_DIR%/contrib/offline}"
 
-: ${DOWNLOAD_YML:="roles/kubespray-defaults/defaults/main/download.yml"}
+: ${DOWNLOAD_YML:="roles/download/defaults/main.yml"}
 
 mkdir -p ${TEMP_DIR}
 
@@ -19,9 +19,6 @@ sed -n '/^downloads:/,/download_defaults:/p' ${REPO_ROOT_DIR}/${DOWNLOAD_YML} \
     | sed 'N;s#\n# #g' | tr ' ' ':' | sed 's/\"//g' > ${TEMP_DIR}/images.list.template
 
 # add kube-* images to images list template
-# Those container images are downloaded by kubeadm, then roles/kubespray-defaults/defaults/main/download.yml
-# doesn't contain those images. That is reason why here needs to put those images into the
-# list separately.
 KUBE_IMAGES="kube-apiserver kube-controller-manager kube-scheduler kube-proxy"
 for i in $KUBE_IMAGES; do
     echo "{{ kube_image_repo }}/$i:{{ kube_version }}" >> ${TEMP_DIR}/images.list.template

contrib/offline/generate_list.yml

@@ -1,7 +1,6 @@
 ---
-- name: Collect container images for offline deployment
-  hosts: localhost
-  become: no
+- hosts: localhost
+  become: false
 
   roles:
     # Just load default variables from roles.
@@ -11,8 +10,7 @@
       when: false
 
   tasks:
-    # Generate files.list and images.list files from templates.
-    - name: Collect container images for offline deployment
+    - name: Generate files.list and images.list files from templates
       template:
         src: ./contrib/offline/temp/{{ item }}.list.template
         dest: ./contrib/offline/temp/{{ item }}.list

contrib/offline/manage-offline-container-images.sh

@@ -15,7 +15,7 @@ function create_container_image_tar() {
 	IMAGES=$(kubectl describe pods --all-namespaces | grep " Image:" | awk '{print $2}' | sort | uniq)
 	# NOTE: etcd and pause cannot be seen as pods.
 	# The pause image is used for --pod-infra-container-image option of kubelet.
-	EXT_IMAGES=$(kubectl cluster-info dump | egrep "quay.io/coreos/etcd:|registry.k8s.io/pause:" | sed s@\"@@g)
+	EXT_IMAGES=$(kubectl cluster-info dump | egrep "quay.io/coreos/etcd:|k8s.gcr.io/pause:" | sed s@\"@@g)
 	IMAGES="${IMAGES} ${EXT_IMAGES}"
 
 	rm -f  ${IMAGE_TAR_FILE}
@@ -23,8 +23,8 @@ function create_container_image_tar() {
 	mkdir  ${IMAGE_DIR}
 	cd     ${IMAGE_DIR}
 
-	sudo ${runtime} pull registry:latest
-	sudo ${runtime} save -o registry-latest.tar registry:latest
+	sudo docker pull registry:latest
+	sudo docker save -o registry-latest.tar registry:latest
 
 	for image in ${IMAGES}
 	do
@@ -32,7 +32,7 @@ function create_container_image_tar() {
 		set +e
 		for step in $(seq 1 ${RETRY_COUNT})
 		do
-			sudo ${runtime} pull ${image}
+			sudo docker pull ${image}
 			if [ $? -eq 0 ]; then
 				break
 			fi
@@ -42,20 +42,19 @@ function create_container_image_tar() {
 			fi
 		done
 		set -e
-		sudo ${runtime} save -o ${FILE_NAME}  ${image}
+		sudo docker save -o ${FILE_NAME}  ${image}
 
 		# NOTE: Here removes the following repo parts from each image
 		# so that these parts will be replaced with Kubespray.
-		# - kube_image_repo: "registry.k8s.io"
+		# - kube_image_repo: "k8s.gcr.io"
 		# - gcr_image_repo: "gcr.io"
 		# - docker_image_repo: "docker.io"
 		# - quay_image_repo: "quay.io"
 		FIRST_PART=$(echo ${image} | awk -F"/" '{print $1}')
-		if [ "${FIRST_PART}" = "registry.k8s.io" ] ||
+		if [ "${FIRST_PART}" = "k8s.gcr.io" ] ||
 		   [ "${FIRST_PART}" = "gcr.io" ] ||
 		   [ "${FIRST_PART}" = "docker.io" ] ||
-		   [ "${FIRST_PART}" = "quay.io" ] ||
-		   [ "${FIRST_PART}" = "${PRIVATE_REGISTRY}" ]; then
+		   [ "${FIRST_PART}" = "quay.io" ]; then
 			image=$(echo ${image} | sed s@"${FIRST_PART}/"@@)
 		fi
 		echo "${FILE_NAME}  ${image}" >> ${IMAGE_LIST}
@@ -95,16 +94,16 @@ function register_container_images() {
 		sed -i s@"HOSTNAME"@"${LOCALHOST_NAME}"@  ${TEMP_DIR}/registries.conf
 		sudo cp ${TEMP_DIR}/registries.conf   /etc/containers/registries.conf
 	else
-		echo "runtime package(docker-ce, podman, nerctl, etc.) should be installed"
+		echo "docker package(docker-ce, etc.) should be installed"
 		exit 1
 	fi
 
 	tar -zxvf ${IMAGE_TAR_FILE}
-	sudo ${runtime} load -i ${IMAGE_DIR}/registry-latest.tar
+	sudo docker load -i ${IMAGE_DIR}/registry-latest.tar
 	set +e
-	sudo ${runtime} container inspect registry >/dev/null 2>&1
+	sudo docker container inspect registry >/dev/null 2>&1
 	if [ $? -ne 0 ]; then
-		sudo ${runtime} run --restart=always -d -p 5000:5000 --name registry registry:latest
+		sudo docker run --restart=always -d -p 5000:5000 --name registry registry:latest
 	fi
 	set -e
 
@@ -112,8 +111,8 @@ function register_container_images() {
 		file_name=$(echo ${line} | awk '{print $1}')
 		raw_image=$(echo ${line} | awk '{print $2}')
 		new_image="${LOCALHOST_NAME}:5000/${raw_image}"
-		org_image=$(sudo ${runtime} load -i ${IMAGE_DIR}/${file_name} | head -n1 | awk '{print $3}')
-		image_id=$(sudo ${runtime} image inspect ${org_image} | grep "\"Id\":" | awk -F: '{print $3}'| sed s/'\",'//)
+		org_image=$(sudo docker load -i ${IMAGE_DIR}/${file_name} | head -n1 | awk '{print $3}')
+		image_id=$(sudo docker image inspect ${org_image} | grep "\"Id\":" | awk -F: '{print $3}'| sed s/'\",'//)
 		if [ -z "${file_name}" ]; then
 			echo "Failed to get file_name for line ${line}"
 			exit 1
@@ -130,9 +129,9 @@ function register_container_images() {
 			echo "Failed to get image_id for file ${file_name}"
 			exit 1
 		fi
-		sudo ${runtime} load -i ${IMAGE_DIR}/${file_name}
-		sudo ${runtime} tag  ${image_id} ${new_image}
-		sudo ${runtime} push ${new_image}
+		sudo docker load -i ${IMAGE_DIR}/${file_name}
+		sudo docker tag  ${image_id} ${new_image}
+		sudo docker push ${new_image}
 	done <<< "$(cat ${IMAGE_LIST})"
 
 	echo "Succeeded to register container images to local registry."
@@ -143,18 +142,6 @@ function register_container_images() {
 	echo "- quay_image_repo"
 }
 
-# get runtime command
-if command -v nerdctl 1>/dev/null 2>&1; then
-    runtime="nerdctl"
-elif command -v podman 1>/dev/null 2>&1; then
-    runtime="podman"
-elif command -v docker 1>/dev/null 2>&1; then
-    runtime="docker"
-else
-    echo "No supported container runtime found"
-    exit 1
-fi
-
 if [ "${OPTION}" == "create" ]; then
 	create_container_image_tar
 elif [ "${OPTION}" == "register" ]; then
@@ -165,8 +152,7 @@ else
 	echo "(2) Deploy local container registry and register the container images to the registry."
 	echo ""
 	echo "Step(1) should be done online site as a preparation, then we bring"
-	echo "the gotten images to the target offline environment. if images are from"
-	echo "a private registry, you need to set PRIVATE_REGISTRY environment variable."
+	echo "the gotten images to the target offline environment."
 	echo "Then we will run step(2) for registering the images to local registry."
 	echo ""
 	echo "${IMAGE_TAR_FILE} is created to contain your container images."

contrib/offline/manage-offline-files.sh

@@ -1,44 +0,0 @@
-#!/bin/bash
-
-CURRENT_DIR=$( dirname "$(readlink -f "$0")" )
-OFFLINE_FILES_DIR_NAME="offline-files"
-OFFLINE_FILES_DIR="${CURRENT_DIR}/${OFFLINE_FILES_DIR_NAME}"
-OFFLINE_FILES_ARCHIVE="${CURRENT_DIR}/offline-files.tar.gz"
-FILES_LIST=${FILES_LIST:-"${CURRENT_DIR}/temp/files.list"}
-NGINX_PORT=8080
-
-# download files
-if [ ! -f "${FILES_LIST}" ]; then
-    echo "${FILES_LIST} should exist, run ./generate_list.sh first."
-    exit 1
-fi
-
-rm -rf "${OFFLINE_FILES_DIR}"
-rm "${OFFLINE_FILES_ARCHIVE}"
-mkdir  "${OFFLINE_FILES_DIR}"
-
-wget -x -P "${OFFLINE_FILES_DIR}" -i "${FILES_LIST}"
-tar -czvf "${OFFLINE_FILES_ARCHIVE}"  "${OFFLINE_FILES_DIR_NAME}"
-
-[ -n "$NO_HTTP_SERVER" ] && echo "skip to run nginx" && exit 0
-
-# run nginx container server
-if command -v nerdctl 1>/dev/null 2>&1; then
-    runtime="nerdctl"
-elif command -v podman 1>/dev/null 2>&1; then
-    runtime="podman"
-elif command -v docker 1>/dev/null 2>&1; then
-    runtime="docker"
-else
-    echo "No supported container runtime found"
-    exit 1
-fi
-
-sudo "${runtime}" container inspect nginx >/dev/null 2>&1
-if [ $? -ne 0 ]; then
-    sudo "${runtime}" run \
-        --restart=always -d -p ${NGINX_PORT}:80 \
-        --volume "${OFFLINE_FILES_DIR}":/usr/share/nginx/html/download \
-        --volume "${CURRENT_DIR}"/nginx.conf:/etc/nginx/nginx.conf \
-        --name nginx nginx:alpine
-fi

contrib/offline/nginx.conf

@@ -1,39 +0,0 @@
-user nginx;
-worker_processes auto;
-error_log /var/log/nginx/error.log;
-pid /run/nginx.pid;
-include /usr/share/nginx/modules/*.conf;
-events {
-    worker_connections 1024;
-}
-http {
-    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
-                      '$status $body_bytes_sent "$http_referer" '
-                      '"$http_user_agent" "$http_x_forwarded_for"';
-    access_log  /var/log/nginx/access.log  main;
-    sendfile            on;
-    tcp_nopush          on;
-    tcp_nodelay         on;
-    keepalive_timeout   65;
-    types_hash_max_size 2048;
-    default_type        application/octet-stream;
-    include /etc/nginx/conf.d/*.conf;
-    server {
-        listen       80 default_server;
-        listen       [::]:80 default_server;
-        server_name  _;
-        include /etc/nginx/default.d/*.conf;
-        location / {
-            root    /usr/share/nginx/html/download;
-        autoindex on;
-        autoindex_exact_size off;
-        autoindex_localtime on;
-        }
-        error_page 404 /404.html;
-            location = /40x.html {
-        }
-        error_page 500 502 503 504 /50x.html;
-            location = /50x.html {
-        }
-    }
-}

contrib/os-services/os-services.yml

@@ -1,5 +1,4 @@
 ---
-- name: Disable firewalld/ufw
-  hosts: all
+- hosts: all
   roles:
     - { role: prepare }

contrib/os-services/roles/prepare/tasks/main.yml

@@ -1,8 +1,5 @@
 ---
-- name: Disable firewalld and ufw
-  when:
-  - disable_service_firewall is defined and disable_service_firewall
-  block:
+- block:
   - name: List services
     service_facts:
 
@@ -12,7 +9,7 @@
       state: stopped
       enabled: no
     when:
-      "'firewalld.service' in services and services['firewalld.service'].status != 'not-found'"
+      "'firewalld.service' in services"
 
   - name: Disable service ufw
     systemd:
@@ -20,4 +17,7 @@
       state: stopped
       enabled: no
     when:
-      "'ufw.service' in services and services['ufw.service'].status != 'not-found'"
+      "'ufw.service' in services"
+
+  when:
+  - disable_service_firewall is defined and disable_service_firewall

contrib/terraform/aws/README.md

@@ -36,7 +36,8 @@ terraform apply -var-file=credentials.tfvars
 ```
 
 - Terraform automatically creates an Ansible Inventory file called `hosts` with the created infrastructure in the directory `inventory`
-- Ansible will automatically generate an ssh config file for your bastion hosts. To connect to hosts with ssh using bastion host use generated `ssh-bastion.conf`. Ansible automatically detects bastion and changes `ssh_args`
+- Ansible will automatically generate an ssh config file for your bastion hosts. To connect to hosts with ssh using bastion host use generated ssh-bastion.conf.
+  Ansible automatically detects bastion and changes ssh_args  
 
 ```commandline
 ssh -F ./ssh-bastion.conf user@$ip
@@ -50,31 +51,69 @@ Example (this one assumes you are using Ubuntu)
 ansible-playbook -i ./inventory/hosts ./cluster.yml -e ansible_user=ubuntu -b --become-user=root --flush-cache
 ```
 
-## Using other distrib than Ubuntu***
+***Using other distrib than Ubuntu***
+If you want to use another distribution than Ubuntu 18.04 (Bionic) LTS, you can modify the search filters of the 'data "aws_ami" "distro"' in variables.tf.
 
-To leverage a Linux distribution other than Ubuntu 18.04 (Bionic) LTS for your Terraform configurations, you can adjust the AMI search filters within the 'data "aws_ami" "distro"' block by utilizing variables in your `terraform.tfvars` file. This approach ensures a flexible configuration that adapts to various Linux distributions without directly modifying the core Terraform files.
+For example, to use:
 
-### Example Usages
+- Debian Jessie, replace 'data "aws_ami" "distro"' in variables.tf with
 
-- **Debian Jessie**: To configure the usage of Debian Jessie, insert the subsequent lines into your `terraform.tfvars`:
+```ini
+data "aws_ami" "distro" {
+  most_recent = true
 
-  ```hcl
-  ami_name_pattern        = "debian-jessie-amd64-hvm-*"
-  ami_owners              = ["379101102735"]
+  filter {
+    name   = "name"
+    values = ["debian-jessie-amd64-hvm-*"]
+  }
+
+  filter {
+    name   = "virtualization-type"
+    values = ["hvm"]
+  }
+
+  owners = ["379101102735"]
+}
 ```
 
-- **Ubuntu 16.04**: To utilize Ubuntu 16.04 instead, apply the following configuration in your `terraform.tfvars`:
+- Ubuntu 16.04, replace 'data "aws_ami" "distro"' in variables.tf with
 
-  ```hcl
-  ami_name_pattern        = "ubuntu/images/hvm-ssd/ubuntu-xenial-16.04-amd64-*"
-  ami_owners              = ["099720109477"]
+```ini
+data "aws_ami" "distro" {
+  most_recent = true
+
+  filter {
+    name   = "name"
+    values = ["ubuntu/images/hvm-ssd/ubuntu-xenial-16.04-amd64-*"]
+  }
+
+  filter {
+    name   = "virtualization-type"
+    values = ["hvm"]
+  }
+
+  owners = ["099720109477"]
+}
 ```
 
-- **Centos 7**: For employing Centos 7, incorporate these lines into your `terraform.tfvars`:
+- Centos 7, replace 'data "aws_ami" "distro"' in variables.tf with
 
-  ```hcl
-  ami_name_pattern        = "dcos-centos7-*"
-  ami_owners              = ["688023202711"]
+```ini
+data "aws_ami" "distro" {
+  most_recent = true
+
+  filter {
+    name   = "name"
+    values = ["dcos-centos7-*"]
+  }
+
+  filter {
+    name   = "virtualization-type"
+    values = ["hvm"]
+  }
+
+  owners = ["688023202711"]
+}
 ```
 
 ## Connecting to Kubernetes

contrib/terraform/aws/create-infrastructure.tf

@@ -20,20 +20,20 @@ module "aws-vpc" {
 
   aws_cluster_name         = var.aws_cluster_name
   aws_vpc_cidr_block       = var.aws_vpc_cidr_block
-  aws_avail_zones          = data.aws_availability_zones.available.names
+  aws_avail_zones          = slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names))
   aws_cidr_subnets_private = var.aws_cidr_subnets_private
   aws_cidr_subnets_public  = var.aws_cidr_subnets_public
   default_tags             = var.default_tags
 }
 
-module "aws-nlb" {
-  source = "./modules/nlb"
+module "aws-elb" {
+  source = "./modules/elb"
 
   aws_cluster_name      = var.aws_cluster_name
   aws_vpc_id            = module.aws-vpc.aws_vpc_id
-  aws_avail_zones       = data.aws_availability_zones.available.names
+  aws_avail_zones       = slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names))
   aws_subnet_ids_public = module.aws-vpc.aws_subnet_ids_public
-  aws_nlb_api_port      = var.aws_nlb_api_port
+  aws_elb_api_port      = var.aws_elb_api_port
   k8s_secure_api_port   = var.k8s_secure_api_port
   default_tags          = var.default_tags
 }
@@ -54,6 +54,7 @@ resource "aws_instance" "bastion-server" {
   instance_type               = var.aws_bastion_size
   count                       = var.aws_bastion_num
   associate_public_ip_address = true
+  availability_zone           = element(slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names)), count.index)
   subnet_id                   = element(module.aws-vpc.aws_subnet_ids_public, count.index)
 
   vpc_security_group_ids = module.aws-vpc.aws_security_group
@@ -78,6 +79,7 @@ resource "aws_instance" "k8s-master" {
 
   count = var.aws_kube_master_num
 
+  availability_zone = element(slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names)), count.index)
   subnet_id         = element(module.aws-vpc.aws_subnet_ids_private, count.index)
 
   vpc_security_group_ids = module.aws-vpc.aws_security_group
@@ -96,10 +98,10 @@ resource "aws_instance" "k8s-master" {
   }))
 }
 
-resource "aws_lb_target_group_attachment" "tg-attach_master_nodes" {
+resource "aws_elb_attachment" "attach_master_nodes" {
   count    = var.aws_kube_master_num
-  target_group_arn = module.aws-nlb.aws_nlb_api_tg_arn
-  target_id        = element(aws_instance.k8s-master.*.private_ip, count.index)
+  elb      = module.aws-elb.aws_elb_api_id
+  instance = element(aws_instance.k8s-master.*.id, count.index)
 }
 
 resource "aws_instance" "k8s-etcd" {
@@ -108,6 +110,7 @@ resource "aws_instance" "k8s-etcd" {
 
   count = var.aws_etcd_num
 
+  availability_zone = element(slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names)), count.index)
   subnet_id         = element(module.aws-vpc.aws_subnet_ids_private, count.index)
 
   vpc_security_group_ids = module.aws-vpc.aws_security_group
@@ -131,6 +134,7 @@ resource "aws_instance" "k8s-worker" {
 
   count = var.aws_kube_worker_num
 
+  availability_zone = element(slice(data.aws_availability_zones.available.names, 0, length(var.aws_cidr_subnets_public) <= length(data.aws_availability_zones.available.names) ? length(var.aws_cidr_subnets_public) : length(data.aws_availability_zones.available.names)), count.index)
   subnet_id         = element(module.aws-vpc.aws_subnet_ids_private, count.index)
 
   vpc_security_group_ids = module.aws-vpc.aws_security_group
@@ -164,7 +168,7 @@ data "template_file" "inventory" {
     list_node                 = join("\n", aws_instance.k8s-worker.*.private_dns)
     connection_strings_etcd   = join("\n", formatlist("%s ansible_host=%s", aws_instance.k8s-etcd.*.private_dns, aws_instance.k8s-etcd.*.private_ip))
     list_etcd                 = join("\n", ((var.aws_etcd_num > 0) ? (aws_instance.k8s-etcd.*.private_dns) : (aws_instance.k8s-master.*.private_dns)))
-    nlb_api_fqdn              = "apiserver_loadbalancer_domain_name=\"${module.aws-nlb.aws_nlb_api_fqdn}\""
+    elb_api_fqdn              = "apiserver_loadbalancer_domain_name=\"${module.aws-elb.aws_elb_api_fqdn}\""
   }
 }
 

contrib/terraform/aws/modules/elb/main.tf

@@ -0,0 +1,57 @@
+resource "aws_security_group" "aws-elb" {
+  name   = "kubernetes-${var.aws_cluster_name}-securitygroup-elb"
+  vpc_id = var.aws_vpc_id
+
+  tags = merge(var.default_tags, tomap({
+    Name = "kubernetes-${var.aws_cluster_name}-securitygroup-elb"
+  }))
+}
+
+resource "aws_security_group_rule" "aws-allow-api-access" {
+  type              = "ingress"
+  from_port         = var.aws_elb_api_port
+  to_port           = var.k8s_secure_api_port
+  protocol          = "TCP"
+  cidr_blocks       = ["0.0.0.0/0"]
+  security_group_id = aws_security_group.aws-elb.id
+}
+
+resource "aws_security_group_rule" "aws-allow-api-egress" {
+  type              = "egress"
+  from_port         = 0
+  to_port           = 65535
+  protocol          = "TCP"
+  cidr_blocks       = ["0.0.0.0/0"]
+  security_group_id = aws_security_group.aws-elb.id
+}
+
+# Create a new AWS ELB for K8S API
+resource "aws_elb" "aws-elb-api" {
+  name            = "kubernetes-elb-${var.aws_cluster_name}"
+  subnets         = var.aws_subnet_ids_public
+  security_groups = [aws_security_group.aws-elb.id]
+
+  listener {
+    instance_port     = var.k8s_secure_api_port
+    instance_protocol = "tcp"
+    lb_port           = var.aws_elb_api_port
+    lb_protocol       = "tcp"
+  }
+
+  health_check {
+    healthy_threshold   = 2
+    unhealthy_threshold = 2
+    timeout             = 3
+    target              = "HTTPS:${var.k8s_secure_api_port}/healthz"
+    interval            = 30
+  }
+
+  cross_zone_load_balancing   = true
+  idle_timeout                = 400
+  connection_draining         = true
+  connection_draining_timeout = 400
+
+  tags = merge(var.default_tags, tomap({
+    Name = "kubernetes-${var.aws_cluster_name}-elb-api"
+  }))
+}

contrib/terraform/aws/modules/elb/outputs.tf

@@ -0,0 +1,7 @@
+output "aws_elb_api_id" {
+  value = aws_elb.aws-elb-api.id
+}
+
+output "aws_elb_api_fqdn" {
+  value = aws_elb.aws-elb-api.dns_name
+}

contrib/terraform/aws/modules/elb/variables.tf

@@ -6,8 +6,8 @@ variable "aws_vpc_id" {
   description = "AWS VPC ID"
 }
 
-variable "aws_nlb_api_port" {
-  description = "Port for AWS NLB"
+variable "aws_elb_api_port" {
+  description = "Port for AWS ELB"
 }
 
 variable "k8s_secure_api_port" {

contrib/terraform/aws/modules/nlb/main.tf

@@ -1,41 +0,0 @@
-# Create a new AWS NLB for K8S API
-resource "aws_lb" "aws-nlb-api" {
-  name                             = "kubernetes-nlb-${var.aws_cluster_name}"
-  load_balancer_type               = "network"
-  subnets                          = length(var.aws_subnet_ids_public) <= length(var.aws_avail_zones) ? var.aws_subnet_ids_public : slice(var.aws_subnet_ids_public, 0, length(var.aws_avail_zones))
-  idle_timeout                     = 400
-  enable_cross_zone_load_balancing = true
-
-  tags = merge(var.default_tags, tomap({
-    Name = "kubernetes-${var.aws_cluster_name}-nlb-api"
-  }))
-}
-
-# Create a new AWS NLB Instance Target Group
-resource "aws_lb_target_group" "aws-nlb-api-tg" {
-  name        = "kubernetes-nlb-tg-${var.aws_cluster_name}"
-  port        = var.k8s_secure_api_port
-  protocol    = "TCP"
-  target_type = "ip"
-  vpc_id      = var.aws_vpc_id
-
-  health_check {
-    healthy_threshold   = 2
-    unhealthy_threshold = 2
-    interval            = 30
-    protocol            = "HTTPS"
-    path                = "/healthz"
-  }
-}
-
-# Create a new AWS NLB Listener listen to target group
-resource "aws_lb_listener" "aws-nlb-api-listener" {
-  load_balancer_arn = aws_lb.aws-nlb-api.arn
-  port              = var.aws_nlb_api_port
-  protocol          = "TCP"
-
-  default_action {
-    type             = "forward"
-    target_group_arn = aws_lb_target_group.aws-nlb-api-tg.arn
-  }
-}

contrib/terraform/aws/modules/nlb/outputs.tf

@@ -1,11 +0,0 @@
-output "aws_nlb_api_id" {
-  value = aws_lb.aws-nlb-api.id
-}
-
-output "aws_nlb_api_fqdn" {
-  value = aws_lb.aws-nlb-api.dns_name
-}
-
-output "aws_nlb_api_tg_arn" {
-  value = aws_lb_target_group.aws-nlb-api-tg.arn
-}

contrib/terraform/aws/modules/vpc/main.tf

@@ -25,14 +25,13 @@ resource "aws_internet_gateway" "cluster-vpc-internetgw" {
 
 resource "aws_subnet" "cluster-vpc-subnets-public" {
   vpc_id            = aws_vpc.cluster-vpc.id
-  count             = length(var.aws_cidr_subnets_public)
-  availability_zone = element(var.aws_avail_zones, count.index % length(var.aws_avail_zones))
+  count             = length(var.aws_avail_zones)
+  availability_zone = element(var.aws_avail_zones, count.index)
   cidr_block        = element(var.aws_cidr_subnets_public, count.index)
 
   tags = merge(var.default_tags, tomap({
     Name = "kubernetes-${var.aws_cluster_name}-${element(var.aws_avail_zones, count.index)}-public"
-    "kubernetes.io/cluster/${var.aws_cluster_name}" = "shared"
-    "kubernetes.io/role/elb" = "1"
+    "kubernetes.io/cluster/${var.aws_cluster_name}" = "member"
   }))
 }
 
@@ -44,14 +43,12 @@ resource "aws_nat_gateway" "cluster-nat-gateway" {
 
 resource "aws_subnet" "cluster-vpc-subnets-private" {
   vpc_id            = aws_vpc.cluster-vpc.id
-  count             = length(var.aws_cidr_subnets_private)
-  availability_zone = element(var.aws_avail_zones, count.index % length(var.aws_avail_zones))
+  count             = length(var.aws_avail_zones)
+  availability_zone = element(var.aws_avail_zones, count.index)
   cidr_block        = element(var.aws_cidr_subnets_private, count.index)
 
   tags = merge(var.default_tags, tomap({
     Name = "kubernetes-${var.aws_cluster_name}-${element(var.aws_avail_zones, count.index)}-private"
-    "kubernetes.io/cluster/${var.aws_cluster_name}" = "shared"
-    "kubernetes.io/role/internal-elb" = "1"
   }))
 }
 

contrib/terraform/aws/output.tf

@@ -14,8 +14,8 @@ output "etcd" {
   value = join("\n", ((var.aws_etcd_num > 0) ? (aws_instance.k8s-etcd.*.private_ip) : (aws_instance.k8s-master.*.private_ip)))
 }
 
-output "aws_nlb_api_fqdn" {
-  value = "${module.aws-nlb.aws_nlb_api_fqdn}:${var.aws_nlb_api_port}"
+output "aws_elb_api_fqdn" {
+  value = "${module.aws-elb.aws_elb_api_fqdn}:${var.aws_elb_api_port}"
 }
 
 output "inventory" {

contrib/terraform/aws/sample-inventory/cluster.tfvars

@@ -33,9 +33,9 @@ aws_kube_worker_size = "t2.medium"
 
 aws_kube_worker_disk_size = 50
 
-#Settings AWS NLB
+#Settings AWS ELB
 
-aws_nlb_api_port = 6443
+aws_elb_api_port = 6443
 
 k8s_secure_api_port = 6443
 

contrib/terraform/aws/templates/inventory.tpl

@@ -24,4 +24,4 @@ kube_control_plane
 calico_rr
 
 [k8s_cluster:vars]
-${nlb_api_fqdn}
+${elb_api_fqdn}

contrib/terraform/aws/terraform.tfvars

@@ -32,7 +32,7 @@ aws_kube_worker_size      = "t3.medium"
 aws_kube_worker_disk_size = 50
 
 #Settings AWS ELB
-aws_nlb_api_port    = 6443
+aws_elb_api_port    = 6443
 k8s_secure_api_port = 6443
 
 default_tags = {

contrib/terraform/aws/terraform.tfvars.example

@@ -25,7 +25,7 @@ aws_kube_worker_size = "t3.medium"
 aws_kube_worker_disk_size = 50
 
 #Settings AWS ELB
-aws_nlb_api_port = 6443
+aws_elb_api_port = 6443
 k8s_secure_api_port = 6443
 
 default_tags = { }

contrib/terraform/aws/variables.tf

@@ -20,38 +20,20 @@ variable "aws_cluster_name" {
   description = "Name of AWS Cluster"
 }
 
-variable "ami_name_pattern" {
-  description = "The name pattern to use for AMI lookup"
-  type        = string
-  default     = "debian-10-amd64-*"
-}
-
-variable "ami_virtualization_type" {
-  description = "The virtualization type to use for AMI lookup"
-  type        = string
-  default     = "hvm"
-}
-
-variable "ami_owners" {
-  description = "The owners to use for AMI lookup"
-  type        = list(string)
-  default     = ["136693071363"]
-}
-
 data "aws_ami" "distro" {
   most_recent = true
 
   filter {
     name   = "name"
-    values = [var.ami_name_pattern]
+    values = ["debian-10-amd64-*"]
   }
 
   filter {
     name   = "virtualization-type"
-    values = [var.ami_virtualization_type]
+    values = ["hvm"]
   }
 
-  owners = var.ami_owners
+  owners = ["136693071363"] # Debian-10
 }
 
 //AWS VPC Variables
@@ -122,11 +104,11 @@ variable "aws_kube_worker_size" {
 }
 
 /*
-* AWS NLB Settings
+* AWS ELB Settings
 *
 */
-variable "aws_nlb_api_port" {
-  description = "Port for AWS NLB"
+variable "aws_elb_api_port" {
+  description = "Port for AWS ELB"
 }
 
 variable "k8s_secure_api_port" {

contrib/terraform/equinix/output.tf

@@ -1,15 +0,0 @@
-output "k8s_masters" {
-  value = equinix_metal_device.k8s_master.*.access_public_ipv4
-}
-
-output "k8s_masters_no_etc" {
-  value = equinix_metal_device.k8s_master_no_etcd.*.access_public_ipv4
-}
-
-output "k8s_etcds" {
-  value = equinix_metal_device.k8s_etcd.*.access_public_ipv4
-}
-
-output "k8s_nodes" {
-  value = equinix_metal_device.k8s_node.*.access_public_ipv4
-}